Nikon FSA02911 Instruction Manual - Page 66
TTL multiple flash operation
![]() |
UPC - 018208047109
View all Nikon FSA02911 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Multiple flash operation in t and ƒ flash modes TTL multiple flash operation Cameras in Groups I through VI and F3-Series 1 Attach the main flash unit to the camera's accessory shoe. • To use the SB-28 off-camera, refer to pages 68-69, System chart for TTL multiple flash, for the correct type of optional TTL Remote Cord to use. 2 Set the flash mode of the master flash unit to t mode. • To obtain the correct exposure with the SB-28 when used as the main flash and set to 3D Multi-Sensor Balanced Fill-Flash, cancel Monitor Preflash on the main flash unit by pressing the µ button until t appears on the LCD panel. 3 Connect the main flash unit to the secondary flash unit(s). -Use one or more TTL Remote Cords SC-18 or SC-19 to connect the SB-28 to the secondary flash unit(s) in series. • Turn off all flash units before connecting. • Use Multi-Flash Adapter AS-10 when using more than three flash units for TTL multiple flash operation, or if the secondary flash units are not equipped with multiple flash terminals. • Use Tripod Adapter AS-11 to attach the SB-16A or SB-17 to a tripod. 66
![](/manual_guide/products/nikon-fsa02911-instruction-manual-329b54c/66.png)