Oki OKIPAGE14e English:OKIPAGE 14e Setup Guide - Page 13

To return to the top exit, close the rear support bar and push the rear exit extender firmly back in place; paper will then exit into the top bin. ! See Operating Your Printer in the User's Guide for information on using special print media. Choosing Paper • For best results, use paper that is smooth and of high quality. • Store paper in its ream wrapper until you are ready to use it, and keep it away from moisture or other conditions that can cause it to wrinkle or curl. • Avoid printing on both sides of the paper for more than a few pages, or preprinted documents that have been in a photocopier. • Try paper before you buy it in quantity. ! See Operating Your Printer in the User's Guide for information on using recycled print media. When purchasing paper, use the following specifications for best results: Basic Weight Paper cassette: 16 to 28 lb (60 to 105 g/m2) Manual feed: 16 to 32 lb (60 to 120.5 g/m2) Composition 100% chemical wood pulp and/or cotton fiber Fusing Compatibility Must not scorch, melt, offset, or release hazardous emissions when heated to 392°F. (200°C) Printing the Demo and Menu Pages With the printer powered up but off line (Ready light is off), press down on the printer's operator panel switch (a) for two seconds. The Ready light will blink and the printer prints the demo page and the menu page. Note: Press the switch again to put the printer back on line. a | 14e Setup Guide E-13