Oki OKIPAGE14e English:OKIPAGE 14e Setup Guide - Page 19

USB Connection - Windows 98, Me G Turn on your computer and wait for it to boot up. G Turn on your printer. G Add New Hardware Wizard appears. Click Next. G Insert the OKIPAGE 14e CD into your CD-ROM drive. G Select "Search for the best driver for your device (Recommended)." Click Next. G Select "CD-ROM drive." Clear other choices. Click Next. G The OKI USB Device driver is located. Click Next. G The files are copied. Select Finish. G The printer is detected and the Add New Hardware Wizard appears. Click Cancel. ! To fully install all the necessary software, use the following install procedures with the OKIPAGE 14e CD. Install the Printer Driver and Status Monitor With the CD in your CD-ROM drive: G Click Start → Run. G Browse to your CD-ROM drive and double-click INSTALL.EXE in the root directory. Click OK. G The OKI Menu Installer appears. Select a language. G Click the button beside Printer Software and follow the on-screen instructions, selecting the LPT1 port. You can change your port selection once the installation is completed. ! You can click a button on the Menu Installer to: • View Help Support and Information • Register your printer online • Select a different language G Click Finish. Exit the Menu Installer. Select the USB printer port: G From the Windows Taskbar, click Start → Settings → Printers. Right-click the OKIPAGE 14e icon, then click Properties\Details. | 14e Setup Guide E-19