Olympus MAUSB-100 Reference Manual - Page 11
Connecting to the computer
View all Olympus MAUSB-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
3 Connecting to the computer Connect the MAUSB-100's connector to the USB port on your computer. (You can plug in the USB connector while the computer is in use.) Notes ● Be sure to connect the MAUSB-100 to your computer AFTER installing the device driver/utility software. ● Make sure the connector is fully inserted. ● When inserting the connector, make sure it is oriented correctly (refer to the pictures below). Inserting the connector incorrectly may damage the connector and/or the computer's USB port. ● Make sure there is adequate space around the computer to connect the MAUSB-100 to the computer properly. ● If there is not enough space for the MAUSB-100 around the computer to allow a direct connection, use the provided USB extension cable. Connecting the MAUSB-100 to the computer incorrectly may result in damage to the connector and/or the computer's USB port. ● Do not apply force to the computer's USB port or the MAUSB-100 when removing/inserting a card from/into the MAUSB-100 if it is directly connected to the computer's USB port. USB port (Type A) The computer's USB port has a mark over it. Status lamps Green status lamp lights : When the MAUSB-100 is connected to the computer and is ready to use. Red status lamp lights* : When reading/writing to a card. *The status lamps may look in orange as both the green and red status lamps light together. ● Do not release the hold switch, remove the card or disconnect the MAUSB-100 from the computer while the red status lamp is lit. Doing so may destroy the data stored on the card. ● The green and red status lamps blink slowly if the card is not recognized correctly. When this happens, follow the instructions in "4 Removing a card" (੬ p. 13) to remove the card from the MAUSB-100, then wipe the contact area with a dry cloth, and insert the card again. If the problem persists, the card may be damaged. 11