Olympus MAUSB-100 Reference Manual - Page 36

Operating the MAUSB-100 The operating procedure for the MAUSB-100 under Mac OS X is described below. 1 Inserting a card 1. Make sure that the hold switch is released, then insert a card into the MAUSB-100's card slot. Make sure the card is level and that the gold-colored contact area is facing down. Insert the card all the way into the slot. 2. Lock the hold switch. MAUSB-100 Hold switch Card slot Status lamps 128MB xD-Picture Card Inserting the card 128MB Notes • Make sure that the card is facing the right way. • Do NOT insert the card at an angle. Forcing a card in diagonally may damage the card and/or the MAUSB-100. • Be sure to lock the hold switch after inserting the card. The computer will not be able to recognize the card if the hold switch is released. 2 Setting the write-protect switch Before connecting the MAUSB-100 to your computer, set the write-protect switch to ON or OFF as required. ON : When you want to protect data stored on the inserted card from being deleted by mistake. The stored data cannot be changed, moved or deleted from the card, and the card cannot be written to or formatted. OFF : When you want to change, move or delete the data stored on the inserted card, or want to write to or format the card. OFF ON Note If you have important data stored on the card, set the write-protect switch to ON to prevent accidental deletion. 36