Onkyo HT-R540 Owner Manual - Page 43

Listening to the Radio-Continued ENTER TUNING STANDBY/ON STANDBY PHONES TUNING PRESET MULTI CH DVD VIDEO 1 VIDEO 2 VIDEO 3 TAPE TUNER C D ENTER RETURN SETUP SPEAKERS A B VCR TONE STEREO LISTENING MODE DIGITAL DISPLAY INPUT TUNING DIMMER MEMORY MODE CLEAR MASTER VOLUME VIDEO 3 INPUT VIDEO L AUDIO R SETUP Positioning the XM Passport System You can check the signal strength of the XM radio signal and adjust the position of the XM Passport System accordingly. 1 SETUP On the AV receiver, press the [SETUP] button. XM Radio Messages The following messages may appear while using XM radio. The XM Passport System is not connected properly. Check the connection. The XM user encryption code is being updated. Please wait. 2 TUNING PRESET Use the Up and Down [ ]/[ ] buttons to select "5. ANT Aiming," and then press [ENTER]. The signal is too weak. Check the XM Passport System connection and reposition it for the best reception. The AV receiver is tuning or decoding audio or text data. Please wait. 3 Adjust the position of the XM Passport System so that the SAT signal strength bar is as long as possible. If you can't receive a satellite signal, press the Down [ ] button to display the terrestrial (TER) signal strength meter and adjust your XM Passport System so that the bar is as long as possible. Terrestrial signals are only available in certain areas. The XM channel you selected is not currently broadcasting. Select another channel. So long as the signal strength is good, you can enjoy XM Radio by using either satellite or terrestrial reception. 43