Onkyo HT-R540 Owner Manual - Page 65

Specifications - watts

Page 65 highlights

Specifications Amplifier Section Rated Output Power (FTC) All channels: 110 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven at 1 kHz, with a maximum total harmonic distortion of 0.9% Rated Output Power (IEC) 7 ch × 130 W at 8 ohms, 1 kHz, 1 ch driven Maximum Output Power (JEITA) 7 ch × 160 W at 8 ohms, 1 kHz, 1 ch driven Dynamic Power 230 W + 230 W (3Ω, Front) 170 W + 170 W (4Ω, Front) 120 W + 120 W (8Ω, Front) THD (Total Harmonic Distortion) 0.08% (Power Rated) Damping Factor 60 (Front, 1kHz, 8Ω) Input Sensitivity and Impedance 200 mV/ 47 kΩ (LINE) Output Level and Impedance 200 mV/ 470 Ω (REC OUT) Frequency Response 5 Hz-100 kHz/ +1 dB-3 dB (Direct mode) Tone Control ±10 dB, 80 Hz (BASS) ±10 dB, 20 kHz (TREBLE) Signal to Noise Ratio 100 dB (LINE, IHF-A) Speaker Impedance 8Ω-16Ω Video Section Input Sensitivity/Output Level and Impedance 1 Vp-p /75Ω (Component and S-Video Y) 0.7 Vp-p /75Ω (Component PB/CB, PR/CR) 0.28 Vp-p /75Ω (S-Video C) 1 Vp-p /75Ω (Composite) Component Video Frequency Response 5 Hz-50 MHz Tuner Section ■ FM Tuning Frequency Range Usable Sensitivity Signal to Noise Ratio THD Frequency Response Stereo Separation North American: 87.5 MHz-107.9 MHz Other: 87.5 MHz-108.0 MHz Stereo: 22.2 dBf (75Ω IHF) Mono: 15.2 dBf (75Ω IHF) Stereo: 67 dB (IHF-A) Mono: 73 dB (IHF-A) Stereo: 0.5% (1 kHz) Mono: 0.3% (1 kHz) 30 Hz-15 kHz / ±1 dB 40 dB (1 kHz) ■ AM Tuning Frequency Range Usable Sensitivity Signal to Noise Ratio THD North American: 530 kHz-1710 kHz Others: 522/530 kHz-1611/1710 kHz 300 µV 40 dB 0.7% General Power Supply Power Consumption Standby Power Consumption Dimensions (W × H × D) Weight North American: AC 120 V, 60 Hz Others: AC 230-240 V, 50Hz North American: 5.9 A Others: 670 W North American: 0.1 W Others: 0.5 W 435 × 151 × 377 mm 17-1/8" × 5-15/16" × 14-13/16" North American: 9.6 kg 21.2 lbs. Others: 10.2 kg 22.5 lbs. ■ Video Inputs Component S-Video Composite DVD, VIDEO1, VIDEO2 DVD, VIDEO1, VIDEO2 DVD, VIDEO1, VIDEO2, VIDEO3 ■ Video Outputs Component MONITOR S-Video MONITOR, VIDEO1 Composite MONITOR, VIDEO1 ■ Audio Inputs Digital Inputs Analog Inputs Multichannel Inputs Optical: 3 Coaxial: 1 DVD (MULTICHANNEL), VIDEO1, VIDEO2, VIDEO3, TAPE, CD 7.1 ■ Audio Outputs Analog Outputs TAPE, VIDEO1 Subwoofer Pre Outputs 1 Speaker Outputs SP A (L, R, C, SL, SR, SBL, SBR) SP B (L, R) Phones 1 65

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80

65
Specifications
Amplifier Section
Video Section
Tuner Section
FM
AM
General
Video Inputs
Video Outputs
Audio Inputs
Audio Outputs
Rated Output Power (FTC)
All channels:
110 watts minimum continuous power
per channel, 8 ohm loads, 2 channels
driven at 1 kHz, with a maximum total
harmonic distortion of 0.9%
Rated Output Power (IEC)
7 ch
×
130 W at 8 ohms, 1 kHz, 1 ch
driven
Maximum Output Power (JEITA)
7 ch
×
160 W at 8 ohms, 1 kHz, 1 ch
driven
Dynamic Power
230 W + 230 W (3
, Front)
170 W + 170 W (4
, Front)
120 W + 120 W (8
, Front)
THD (Total Harmonic
Distortion)
0.08% (Power Rated)
Damping Factor
60 (Front, 1kHz, 8
)
Input Sensitivity and
Impedance
200 mV/ 47 k
(LINE)
Output Level and
Impedance
200 mV/ 470
(REC OUT)
Frequency Response
5 Hz–100 kHz/ +1 dB–3 dB (Direct mode)
Tone Control
±10 dB, 80 Hz (BASS)
±10 dB, 20 kHz (TREBLE)
Signal to Noise Ratio
100 dB (LINE, IHF-A)
Speaker Impedance
8
–16
Input Sensitivity/Output
Level and Impedance
1 Vp-p /75
(Component and S-Video Y)
0.7 Vp-p /75
(Component P
B
/C
B
, P
R
/C
R
)
0.28 Vp-p /75
(S-Video C)
1 Vp-p /75
(Composite)
Component Video
Frequency Response
5 Hz–50 MHz
Tuning Frequency
Range
North American: 87.5 MHz–107.9 MHz
Other: 87.5 MHz–108.0 MHz
Usable Sensitivity
Stereo: 22.2 dBf (75
IHF)
Mono: 15.2 dBf (75
IHF)
Signal to Noise Ratio
Stereo: 67 dB (IHF-A)
Mono: 73 dB (IHF-A)
THD
Stereo: 0.5% (1 kHz)
Mono: 0.3% (1 kHz)
Frequency Response
30 Hz–15 kHz / ±1 dB
Stereo Separation
40 dB (1 kHz)
Tuning Frequency
Range
North American: 530 kHz–1710 kHz
Others: 522/530 kHz–1611/1710 kHz
Usable Sensitivity
300 μV
Signal to Noise Ratio
40 dB
THD
0.7%
Power Supply
North American: AC 120 V, 60 Hz
Others:
AC 230-240 V, 50Hz
Power Consumption
North American: 5.9 A
Others: 670 W
Standby Power
Consumption
North American: 0.1 W
Others: 0.5 W
Dimensions
(W
×
H
×
D)
435
×
151
×
377 mm
17-1/8"
×
5-15/16"
×
14-13/16"
Weight
North American:
9.6 kg
21.2 lbs.
Others:
10.2 kg
22.5 lbs.
Component
DVD, VIDEO1, VIDEO2
S-Video
DVD, VIDEO1, VIDEO2
Composite
DVD, VIDEO1, VIDEO2, VIDEO3
Component
MONITOR
S-Video
MONITOR, VIDEO1
Composite
MONITOR, VIDEO1
Digital Inputs
Optical: 3
Coaxial: 1
Analog Inputs
DVD (MULTICHANNEL), VIDEO1,
VIDEO2, VIDEO3, TAPE, CD
Multichannel Inputs
7.1
Analog Outputs
TAPE, VIDEO1
Subwoofer Pre Outputs
1
Speaker Outputs
SP A (L, R, C, SL, SR, SBL, SBR)
SP B (L, R)
Phones
1