Onkyo HT-R540 Owner Manual - Page 55
Crossover Frequency, Double Bass, Notes, Small, Large
View all Onkyo HT-R540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Advanced Setup-Continued 7 Use the Down [ ] button to select "Surr Back," and use the Left and Right [ ]/[ ] buttons to select Small, Large, or None. Small: Select if the surround back speakers are small. Large: Select if the surround back speakers are large. None: Select if no surround back speakers are connected. Notes: • If the Surround setting in step 6 is set to None, this setting does not appear. • If the Surround setting in step 6 is set to Small, the Large option cannot be selected. 8 Use the Down [ ] button to select "Surr Back Ch," and use the Left and Right [ ]/[ ] buttons to select 2ch or 1ch. 2ch: Select if two (left and right) surround back speakers are connected. 1ch: Select if one surround back speaker is connected. Note: • If the Surround and Surr Back set- tings in steps 6 and 7 are set to None, this setting does not appear. Continue with step 9 of the "Crossover Frequency" setting. Crossover Frequency This setting only applies to the speakers that you specified as Small in the "Speaker Configuration" on page 54. To get the best bass performance from your speaker system, you need to set the crossover frequency according to the size and frequency response of your speakers 9 Use the Down [ ] button to select "Crossover," and then use the Left and Right [ ]/[ ] but- tons to select a crossover fre- quency. Use the diameter of the smallest speaker in your system when choosing the crossover frequency. Speaker cone diameter Crossover frequency Over 8 in. (20 cm) 40/50/60Hz* 6-1/2 to 8 in. (16-20 cm) 80Hz 5-1/4 to 6-1/2 in. (13-16 cm) 100Hz (default) 3-1/2 to 5-1/4 in. (9-13 cm) 120Hz Under 3-1/2 in. (9 cm) 150/200Hz* *Choose the setting suitable for the speaker. Continue with step 10 of the "Double Bass" setting below. Notes: • For a more accurate setting, look up the frequency response in the manuals supplied with your speakers and set accordingly. • Choose a higher crossover frequency if you want more sound from your subwoofer. Double Bass With the Double Bass function, you can boost bass output by feeding bass sounds from the front left and right channels to the subwoofer. This function can be set only if the Subwoofer setting (step 3) is set to Yes, and the Front setting (step 4) is set to Large in the Speaker Configuration on page 54. 10 Use the Down [ ] button to select "Double Bass," and then use the Left and Right [ ]/[ ] buttons to select: On: Double Bass function on. Bass from the front left and right channels is also fed to the subwoofer (default). Off: Double Bass function off. 11 SETUP Press the [SETUP] button. Setup closes. 55