Onkyo HT-R540 Owner Manual - Page 53
Speaker Levels
View all Onkyo HT-R540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Advanced Setup-Continued Speaker Levels With this function, you can adjust the volume of each speaker so that all speakers can be heard equally at the listening position. The speaker levels cannot be adjusted while a pair of headphones is connected, speaker set B is on, or the AV receiver is muted. 1 RECEIVER Press the [RECEIVER] button followed by the [SETUP] button on the remote controller. SETUP 2 Use the Up and Down [ ]/[ ] buttons to select "3. Level Cal," and then press the [ENTER] button. A pink noise test tone is output by the front left speaker. 5 6 SETUP Repeat step 4 so that the level of the test tone from each speaker is the same. Speakers that you set to No or None in the Speaker Configuration (page 54) do not output the test tone. Press the [SETUP] button. Setup closes. Don't forget to turn down the volume if you turned it up while setting the levels. Note: • A quicker way to adjust the speaker levels is to press the remote controller's [TEST TONE] button to output the test tone, use the [LEVEL-] and [LEVEL+] buttons to adjust the levels, and use the [CH SEL] button to select the speakers. 3 Turn up the volume so that you can hear the test tone suffi- ciently. While each speaker outputs the test tone, its name appears on the display, as shown. 4 Use the Left and Right [ ]/[ ] buttons to adjust the speaker level, and use the Down [ ] but- ton to select the next speaker. The level can be adjusted from -12 to +12 dB in 1 dB steps (-15 to +12 dB for the subwoofer). 53