Onkyo HT-R540 Owner Manual - Page 54
Speaker Configuration, Small, Large
View all Onkyo HT-R540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Advanced Setup-Continued Speaker Configuration, Crossover Frequency, 4 and Double Bass settings only need to be changed if you're not using the speakers in this package. These settings cannot be changed while head- phones are connected, speaker set B is on, or the multichannel DVD input is being used. Speaker Configuration This section explains how to specify which speakers are connected and their sizes. For speakers with a cone diameter larger than 6-1/2 inches (16 cm), 5 specify Large (full band). For those with a smaller diameter, specify Small (default crossover 100 Hz). The crossover frequency can be changed on page 55. Cone diameter 1 RECEIVER Press the [RECEIVER] button followed by the [SETUP] button. SETUP 6 2 Use the Up and Down [ ]/[ ] buttons to select "1. SP Config," and then press the [ENTER] but- ton. 3 While the Subwoofer setting is selected, use the Left and Right [ ]/[ ] buttons to select Yes or No. Yes: Select if a subwoofer is con- nected. No: Select if no subwoofer is con- nected. Use the Down [ ] button to select "Front," and then use the Left and Right [ ]/[ ] buttons to select Small or Large. Small: Select if the front speakers are small. Large: Select if the front speakers are large. Note: • If the Subwoofer setting in step 3 is set to No, this setting is fixed at Large and does not appear. Use the Down [ ] button to select "Center," and then use the Left and Right [ ]/[ ] buttons to select Small, Large, or None. Small: Select if the center speaker is small. Large: Select if the center speaker is large. None: Select if no center speaker is connected. Note: • If the Front setting in step 4 is set to Small, the Large option cannot be selected. Use the Down [ ] button to select "Surround," and then use the Left and Right [ ]/[ ] buttons to select Small, Large, or None. Small: Select if the surround speak- ers are small. Large: Select if the surround speak- ers are large. None: Select if no surround speakers are connected. Note: • If the Front setting in step 4 is set to Small, the Large option cannot be selected. 54