Onkyo HT-R667 Owner Manual - Page 16
Speaker Package, Subwoofer (SKW-750X), Front, Center, Surround, and Surround back speakers (SKF-750XF - av receiver
View all Onkyo HT-R667 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Speaker Package Subwoofer (SKW-750X) For detailed information, see the pages in parentheses. ■ Front ■ Rear 1 X A STANDBY/ON indicator Red: Subwoofer in standby mode Blue: Subwoofer on With the Auto Standby function, the SKW-750X automatically turns on when an input signal is detected in Standby mode. When there's no input signal for a while, the SKW-750X automatically enters Standby mode. B OUTPUT LEVEL control (50) This control is used to adjust the volume of the subwoofer. C LINE INPUT (22) This RCA input should be connected to the subwoofer pre out on your AV receiver, amp, or other receiver with supplied RCA cable. Note: The Auto Standby function turns the subwoofer on when the input signal exceeds a certain level. If the Auto Standby function does not work reliably, try slightly increasing or decreasing the subwoofer output level on the AV receiver (page 81). To AC outlet 23 Front, Center, Surround, and Surround back speakers (SKF-750XF, SKC-750XC, SKM-750XS, SKB-750X) ■ Rear SKF-750XF/SKM-750XS/SKC-750XC/SKB-750X 1 3 2 1 Keyhole slots These keyhole slots can be used to wall-mount the speaker. See page 23 for mounting instructions. 2 Speaker terminals These push terminals are for connecting the speaker to your AV Receiver, amp, or other receiver with the supplied speaker cables. The supplied speaker cables are color-coded for easy identification. Simply connect each cable to the same-colored positive speaker terminal. 3 Speaker mount/bracket inserts These threaded inserts can be used to attach the speaker either horizontally or vertically to a speaker mount or bracket. Note: Use commercially available 1/4" screws to attach the speaker to a speaker mount or bracket. 16