Onkyo HT-R667 Owner Manual - Page 57

DS-A1L Dock for the iPod About the DS-A1L Dock With the supplied DS-A1L Onkyo Dock, you can easily play the music stored on your Apple iPod through the AV receiver and enjoy great sound. You can use the AV receiver's remote controller to operate your iPod. For the latest information on the Dock, see the Onkyo Web site at: www.onkyo.com iPod adapter iPod connector ■ Adjusting the iPod Adapter The iPod adapter needs to be adjusted to match your particular iPod. If there's a gap between the back of your iPod and the adapter, turn the adapter counterclockwise to close the gap. Turning the adapter counterclockwise moves it forward. Turning it clockwise moves it backward. Forward Backward Power indicator iPod slot Compatible iPod models ■ Made for: • 5th Generation iPod (iPod with video) • iPod photo (iPod with color display) • 4th Generation iPod • 2nd Generation iPod nano • 1st Generation iPod nano • iPod mini Note: • 3rd generation iPod models are not supported. • Before using the Dock, update your iPod with the latest software, available from the Apple Web site at: www.apple.com Putting Your iPod in the Dock 1. Turn on the AV receiver, and select the appropriate inputs on the AV receiver. 2. Align your iPod with the Dock's iPod slot, and carefully place your iPod in the slot, as shown. Remove iPod case before inserting Notes: • To prevent iPod connector damage, don't twist your iPod when inserting or removing it, and be careful not to knock over the Dock while your iPod is inserted. • Don't use the Dock with any other iPod accessories, such as FM transmitters and microphones, as they may cause a malfunction. Function Overview ■ Basic Operation Note: • The AV receiver may take several seconds to star- tup, so you might not hear the first few seconds of the first song. • System On Function: When you turn on the AV receiver, the iPod turns on as well. • System Off Function: When you turn off the AV receiver, the iPod turns off as well. • Auto Power On Function*: If you start iPod playback while the AV receiver is on Standby, the AV receiver will automatically turn on and select your iPod as the input source. Then, your iPod will start playback. • Direct Change Function*: If you start iPod playback while listening to another input source, the AV receiver will automatically select your iPod as the input source. • Linked Dimmer Operation: When you use the AV receiver's Dimmer function to change its display's brightness, the brightness of the Dock's Power indicator will change as well. • Using the AV receiver's Remote Controller: You can use the AV receiver's remote controller to control basic iPod functions. * If you use your iPod's controls to start an iPod slideshow or video, this function will not work, so use the remote controller instead. 57