Onkyo TX-NR3007 Owner Manual - Page 32

Connecting the AV receiver-Continued Connecting Both Audio & Video By connecting both the audio and video outputs of your DVD/BD player and other AV components to the AV receiver, you can select both the audio and video simultaneously simply by selecting the appropriate input source on the AV receiver. : Signal Flow Video Audio Video Audio TV, projector, etc. DVD/BD player, etc. Speakers (see page 21 for connection information) Which Connections Should I Use? The AV receiver supports several connection formats for compatibility with a wide range of AV equipment. The format you choose will depend on the formats supported by your other components. Use the following sections as a guide. Video Connection Formats Video equipment can be connected to the AV receiver by using any one of the following video connection formats: composite video, S-Video, component video, or HDMI, the latter offering the best picture quality. The AV receiver can upconvert and downconvert between video formats, depending on the "Monitor Out" setting, which generally determines whether video signals are upconverted for the component video output or the HDMI output. For optimal video performance, THX recommends that video signals pass through the system without upconversion (e.g., component video input through to component video output). To by-pass video upconversion in the receiver, simultaneously press the [VCR/DVR] and [RETURN] buttons on the AV receiver. While continuing to hold down the [VCR/DVR] button, press the [RETURN] button to toggle until "Skip" appears on the display. Release both buttons. To use the video upconversion in the receiver, repeat the above process until "Use" appears on the display and release the buttons. ■ "Monitor Out" Setting Set to "HDMI Main" or "HDMI Sub" With the "Monitor Out" setting set to "HDMI Main" or "HDMI Sub" (see page 52), video input DVD/BD player, etc. Video Signal Flow Chart signals flow through the AV receiver as shown, with composite video, S-Video, and component video sources all being upconverted for the HDMI output. Use the "HDMI Main" or "HDMI Sub" setting if you connect the AV Composite S-Video Component IN HDMI receiver's HDMI OUT MAIN or HDMI OUT SUB, respectively, to your TV. AV receiver The composite video, S-Video, and component video outputs pass through their respective input signals as they are. Composite MONITOR OUT S-Video Component HDMI Note: If not connected to the same output you have selected in the "Monitor Out" setting, the "Monitor Out" setting will be automatically switched TV, projector, etc. to "Analog" (see page 52). In this case, the setting of the output resolution will be that for HDMI output (see page 52). However, it will be switched to "1080i" when "1080p" is selected, and to "Through" when "Auto" is selected. 32