Onkyo TX-NR3007 Owner Manual - Page 57
Analog Audio Input Setup, Speaker Settings, Use the Left and Right
View all Onkyo TX-NR3007 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
First Time Setup-Continued Analog Audio Input Setup If you connect a component to the AV receiver's analog multichannel input, you must assign that input to an input selector. For example, if you connect your DVD/ BD player to the MULTI CH input, you must assign it to the DVD/BD input selector. 1 Press the [RECEIVER] button, followed by the [SETUP] button. The main menu appears onscreen. If the main menu doesn't appear, make sure the appropriate external input is selected on your TV. 2 Use the Up and Down [R]/[X] but- tons to select "1. Input/Output Assign", and then press [ENTER]. The "Input/Output Assign" menu appears. 1. Input/Output Assign 1. Monitor Out 2. HDMI Input 3. Component Video Input 4. Digital Audio Input 5. Analog Audio Input 3 Use the Up and Down [R]/[X] but- tons to select "5. Analog Audio Input", and then press [ENTER]. The "Analog Audio Input" menu appears. 1-5. Analog Audio Input Multich Subwoofer Input Sensitivity - - - - - 5 Press the [SETUP] button. The setup menu closes. Notes: • To listen to the component connected to the multi- channel input, press the [AUDIO] button and select the "Audio selector" (see page 119). • This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button. Speaker Settings If you change these settings, you must run Audyssey MultEQ® XT Room Correction and Speaker Setup again (see page 61). If the impedance of any speaker is 4 ohms or more but less than 6, set the minimum speaker impedance to 4 ohms. To use bi-amping or bridging, you must change the "Speakers Type(FrontA)" or "Speakers Type(FrontB)" setting. For hookup information, see pages 23 to 26. Notes: • When bridging is used, the AV receiver is able to drive up to 7.2 speakers in the main room. • When bi-amping is used, the AV receiver is able to drive up to 7.2 speakers in the main room. • Before you change these settings, turn down the volume. 1 Press the [RECEIVER] button, followed by the [SETUP] button. The main menu appears onscreen. If the main menu doesn't appear, make sure the appropriate external input is selected on your TV. 4 Use the Left and Right [F]/[S] buttons to select an input selec- tor. You can assign the multichannel input to the following input selectors: "DVD/ BD", "VCR/DVR", "CBL/SAT", "GAME", "AUX 1", "AUX 2", "TV/ TAPE", "CD", or "PHONO". If you don't want to assign the multichannel input, set to 57