Onkyo TX SR674 Owner Manual - Page 71
Equalizer Setting
UPC - 751398007118
View all Onkyo TX SR674 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Advanced Setup-Continued Equalizer Setting This setting is set automatically by the Automatic Speaker Setup function (see page 38). Here you can adjust the EQ of individual speakers. To set the volume of individual speakers see page 70. 1 2 ON/STANDBY ZONE2 REMOTE MODE RECEIVER TAPE INPUT SELECTOR 1 2 3 V1 V2 V3 DVD M D/CDR C D HDD 4 5 6 TV V4 MULTI CH DVD 7 8 9 VCR TAPE TUNER 10 11 +10 0 C D 12 CABLE CLR SAT D TUN --/--- ENT DIMMER SLEEP TV VOL INPUT GUIDE TOP MENU CH DISC ALBUM VOL PREVIOUS MENU MUTING PLAYLIST/CAT ENTER PLAYLIST/CAT RETURN SETUP 2-6 1, 7 1 RECEIVER Press the [RECEIVER] button followed by the [SETUP] button. The main menu appears onscreen. SETUP 2 Use the Up and Down [ ]/[ ] buttons to select "4. Equalizer Settings," and then press [ENTER]. The Equalizer Settings menu appears. 3 Use the Left and Right [ ]/[ ] buttons to select: Off: Tone off, response flat. Audyssey: The tone for each speaker is set automatically by the Automatic Speaker Setup function. Be sure to select this setting after having performed the Automatic Speaker Setup. Manual: You can adjust the EQ of each speaker manually. If you select Manual, continue with this procedure. If you select Off or Audyssey, go to step 7. 4 Use the Down [ ] button to select "Channel," and then use the Left and Right [ ]/[ ] but- tons to select a speaker. 4.Equalizer Settings a.Equalizer : Manual b.Channel : Front c. 80Hz : 0dB d. 250Hz : 0dB e. 800Hz : 0dB f. 2500Hz : 0dB g. 8000Hz : 0dB 5 6 7 SETUP Use the Up and Down [ ]/[ ] buttons to select a frequency, and then use the Left and Right [ ]/[ ] buttons to adjust the level at that frequency. The volume at each frequency can be adjusted from -6 to +6 dB in 1 dB steps. Tip: Low frequencies (e.g., 80 Hz) affect bass sounds; high frequencies (e.g., 8000 Hz) affect treble sounds. Use the Up [ ] button to select "Channel," and then use the Left and Right [ ]/[ ] buttons to select another speaker. Repeat steps 5 and 6 for each speaker. Press the [SETUP] button. The setup menu closes. Notes: • When the listening mode is set to Direct or Pure Audio, no effect will be produced. • This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button. 71