Onkyo TX SR674 Owner Manual - Page 80
Setting the Powered Zone 2
UPC - 751398007118
View all Onkyo TX SR674 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Zone 2-Continued Setting the Powered Zone 2 To use Zone 2, you must make this setting. It enables the speakers connected to the ZONE 2 SPEAKERS terminals so that they produce sound when Zone 2 is used. 1 RECEIVER Press the [RECEIVER] button followed by the [SETUP] button. The main menu appears onscreen. SETUP 2 Use the Up and Down [ ]/[ ] buttons to select "8. Hardware Setup," and then press [ENTER]. The Hardware Setup menu appears. 4 SETUP Press the [SETUP] button. The setup menu closes. Note: This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button. 3 Use the Up and Down [ ]/[ ] buttons to select "Powered Zone 2," and use the Left and Right [ ]/[ ] buttons to select: 8.Hardware Setup a.SP Impedance :6ohms b.PoweredZone2:NotAct c.TV Format :Auto d.AM Freq. Step: 9kHz e.Remote ID :1 f.HDMI Audio Out :Off g.SW Input Sensitivity : 0dB Not Act: ZONE 2 SPEAKERS terminals deactivated. Act: ZONE 2 SPEAKERS terminals activated. When Zone 2 is activated and turned on (see page 81), the speakers connected to the ZONE 2 SPEAKERS terminals output sound, but the speakers connected to the SURROUND BACK SPEAKERS terminals do not (when Zone 2 is activated but not used, the surround back speakers work as normal). 80