Palsonic TFTV4355M Owners Manual - Page 12
Connecting to Coaxial Digital Output, Connecting to a PC
View all Palsonic TFTV4355M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
System Connections Connecting to Coaxial Digital Output This unit is designed with a coaxial digital audio jack, can be connected to the digital amplifier, see the figure below. DIGITAL AMPLIFIER This feature is available only for amplifiers equipped with coaxial digital audio input connectors. Connecting to a PC The unit can be connected to a PC via the VGA cable and PC audio cable. 1. Connect one end of the VGA cable to the VGA jack on the jack panel of the unit and the other end to the PC VGA output. 2. Connect one end of the audio cables to the PC IN jack on the jack panel of the unit and the other end to the PC audio output jack. 3. Set the PC video resolution to match that of the television (Native 1920 x 1080@60Hz). 4. After connection, turn on the power of the unit and the PC. 5. Press INPUT then direction buttons to select PC mode, and then press the OK button to confirm. 11