Panasonic AG DVC20 Dv Camcorder - Page 17

Viewfinder displays Display item 1 Extender display What is displayed EX Status causing the display to appear Displayed when the lens extender is being used. 2 INTERVAL REC status display 3 Time code display 4 Center marker iREC TCG TCR UBG UBR CNT 12:59:59:29 12:59:59:29 AB:CD:EF:00 AB:CD:EF:00 01:59:59 + 5 1st line message display (changes in switch settings) AWB Ach ¢.¢K AWB Ach ¢.¢K UNDER AWB Ach ¢.¢K OVER AWB Bch ¢.¢K AWB Bch ¢.¢K UNDER AWB Bch ¢.¢K OVER AWB PRE ¢.¢K AUTO KNEE ON AUTO KNEE OFF GAIN ¢¢dB FILTER ¢ SHUTTER OFF SHUTTER 1/¢¢¢¢ IRIS MODE ¢¢¢¢ FULL AUTO ON FULL AUTO OFF SCENE FILE USER SCENE FILE 1 SCENE FILE 2 SCENE FILE 3 SCENE FILE 4 SCENE FILE STD (AWB, ABB operation AWB ACTIVE displays) AWB OK ¢.¢K AWB OK ¢.¢K UNDER AWB OK ¢.¢K OVER 5 2nd line message display (error result message displayed after AWB or ABB has been performed) AWB NG AWB PRE ATW MODE ABB ACTIVE ABB OK ABB NG color temp LOW color temp HIGH LEVEL OVER LOW LIGHT UNSTABLE CONDITION TIME OVER 6 IRIS MODE switch status display 7 QUICK FOCUS display SPOT BACK QUICK FOCUS Indicates the interval recording mode. For further details, refer to "INTERVAL REC function" (page 28). Indicates the TCG (time code generator) value. Indicates the TCR (time code reader) value. Indicates the UBG (user's bit generator) value. Indicates the UBR (user's bit reader) value. Indicates the COUNTER (counter) value. Displayed when ON is selected as the CENTER MARK setting (see page 35). It indicates the center of the viewfinder screen. Displayed when the AWB has been attained for channel A. Displayed when the AWB has been attained for channel A, and the color temperature is lower than the display range. Displayed when the AWB has been attained for channel A, and the color temperature is higher than the display range. Displayed when the AWB has been attained for channel B. Displayed when the AWB has been attained for channel B, and the color temperature is lower than the display range. Displayed when the AWB has been attained for channel B, and the color temperature is higher than the display range. Displayed when AWB has been switched to PRE. Displayed when AUTO KNEE has been changed from OFF to ON. Displayed when AUTO KNEE has been changed from ON to OFF. Displayed when the gain has been switched. Displayed when the filter has been switched. Displayed when the shutter has been set to OFF. Displayed when the shutter has been set to ON. Displayed when the IRIS MODE switch setting has been changed. Displayed when FULL AUTO has been changed from OFF to ON. Displayed when FULL AUTO has been changed from ON to OFF. Displayed when the scene file dial setting has been switched. Displayed while the AWB operation is in progress. Displayed when AWB is completed error-free. Displayed when AWB is completed error-free, and the color temperature is outside the display range (under ¢.¢K). Displayed when AWB is completed error-free, and the color temperature is outside the display range (over ¢.¢K). Displayed when AWB is completed with an error. Displayed when AWB cannot be performed because AWB is set to PRE. Displayed when ATW (full time auto white balance) is in progress. Displayed while the ABB operation is in progress. Displayed when ABB is completed error-free. Displayed when ABB is completed with an error. Warns that the color temperature is too low during the AWB operation. Warns that the color temperature is too high during the AWB operation. Warns that the brightness is too high during the AWB operation. Warns that the brightness is too low during the AWB operation. Warns that the screen is not stable during the AWB or ABB operation. Warns that the AWB or ABB processing could not be completed within the allotted time. Displayed when the IRIS MODE switch is at the SPOT.L position. Displayed when the IRIS MODE switch is at the BACK.L position. Displayed when QUICK FOCUS is ON. 17