Panasonic AG DVC20 Dv Camcorder - Page 33

Menu contents SCENE MENU (main menu) PROCESS Item H DETAIL V DETAIL DTL CORING H.DTL FREQ. MATRIX CHROMA LEVEL CHROMA PHASE MASTER PED KNEE POINT WRITE Setting options -10 : +00 : +10 -06 : +00 : +10 -2 : +0 : +8 2MHz 3MHz 4MHz A B ADJ -2 : +0 : +2 -31 : +00 : +31 -26 : +00 : +26 90% : 100% Remarks For setting the amount of detail in the horizontal direction. For setting the amount of detail in the vertical direction. For setting the amount of detail coring. For setting the detail boost frequency in the horizontal direction. For selecting the color compensation matrix table. A: Standard setting B: For shooting under fluorescent lighting. ADJ:Changes to the MATRIX value set for . For setting the chroma level. For setting the chroma phase. The skin tone takes on a reddish tinge in the "+" direction. For setting the master pedestal level. For setting the knee point position. For saving the data. ADDITIONAL PROCESS Item MATRIX ADJ.R-G R-B G-R G-B B-R B-G WRITE Setting options +00 +00 +12 +00 +00 +00 Remarks This is effective when ADJ has been selected for the "MATRIX" item of . The MATRIX table can be adjusted/set as desired. For saving the data. MAIN menu 1 of 2 (main menu) #NEXT¢¢¢¢ MAIN 1/2 ¢¢¢¢ DATA READ/WRITE.. SW MODE.. VIDEO IN/OUT.. VTR FUNCTION.. VTR OPTION.. BATTERY.. MIC/AUDIO.. LENS SHADING.. DATA READ/WRITE Item FILE SELECT Setting options 1/2/3/4 Remarks For storing the menu setting parameters in the memory. For further details, refer to "How to use file select." (page 28) SW MODE Item LOW GAIN MID GAIN HIGH GAIN ATW SUPER V QUICK FOCUS FULL AUTO SCENE FILE Setting options 0dB : 36dB 0dB : 9dB : 36dB 0dB : 18dB : 36dB PRE Ach Bch OFF ON OFF ENABLE DISABLE ENABLE DISABLE ENABLE DISABLE Remarks For setting the gain allocated to the LOW GAIN switch. A setting from 0 to 36 dB can be selected. For setting the gain allocated to the MID GAIN switch. A setting from 0 to 36 dB can be selected. For setting the gain allocated to the HIGH GAIN switch. A setting from 0 to 36 dB can be selected. For setting at which WHITE BAL switch position the full time auto white balance mode is to be enabled. PRE:ATW is enabled at the PRE position. Ach: ATW is enabled at the Ach position. Bch: ATW is enabled at the Bch position. OFF:Full time auto balance is not performed. For selecting the vertical high resolution mode. For enabling or disabling the quick focus function. For enabling or disabling the full auto function. For enabling or disabling the scene file function. ENABLE: The scene file function is enabled. DISABLE: The scene file function is restricted to the user files. " " indicates the factory setting. 33