Panasonic AG DVC20 Dv Camcorder - Page 27
Audio recording
![]() |
UPC - 791871302958
View all Panasonic AG DVC20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Audio recording Selecting the audio input signals 1 Select the desired input signals using the AUDIO IN switch. To use the front microphone i Select FRONT (MIC). To use the rear microphone i Select REAR (MIC). To use the audio products i Select REAR (LINE). ≥When the front microphone has been selected, select ON as the setting for the MIC/AUDIO sub-menu item if the phantom mic (+48 V) needs to be supported. (See page 35) ≥When the exterior microphone is selected and phantom mic (+48 V) needs to be supported, set the mic power switch to ON. Monitor speaker AUDIO LEVEL CH1 control AUDIO LEVEL CH2 control JOG dial button MONITOR control AUDIO SELECT switch AUDIO IN switch PHONES jack Mic power switch Adjusting the audio recording level When the AUTO SELECT CH1/CH2 selector switch is set to AUTO, the input levels of the CH1 and CH2 sound are automatically adjusted. To adjust the input levels of the CH1 and CH2 sound manually, proceed as follows: 1 Set the AUTO SELECT CH1/CH2 selector switch to MAN. 2 While monitoring the audio level meter inside the viewfinder, adjust the AUDIO LEVEL CH1 and CH2 controls in such a way that the maximum input level does not exceed Monitoring the sound during recording The audio input signals can be monitored through the monitor speaker or earphone. When the PHONES jack is used, no sound will be heard through the monitor speaker. The volume of the monitored sound can be adjusted using the MONITOR control. Howl may be caused if the volume of the audio monitor speaker is too high. In a this situation, rotate the audio monitor level control to a lower level which does not give rise to howl. EX iREC TAPE NEAR END FLUO. TCG 12:34:56:00 AWB+02 Z78 ¢ 1 3.2K ¢ 2 ATW F5.6 0dB SPOT QUICK FOCUS FL1 1/100 LOW LIGHT DJan-01-01 23:59:00 48K CH1 CH2 ========= ¢¢¢min 13.4V CH1 CH2 -32 -28 -24 -20 -16 -12 -8 -4 0dB The reference value 27
![](/manual_guide/products/panasonic-ag-dvc20-dv-camcorder-1fdf2a4/27.png)