Panasonic AG DVC20 Dv Camcorder - Page 34

Menu contents MAIN menu 1 of 2 (main menu) VIDEO IN/OUT VTR OPTION Item Setting options Remarks Item Setting options Remarks VIDEO OUT MENU ON OFF VIDEO OUT SEL ENC VF INPUT SELECT CAMERA 1394 REMOTE SELECT LOCAL 1394 SET UP 0% 7.5% For selecting whether to output the menu screens to the VIDEO OUT connector. ON: For the screens are output. OFF:For the screens are not output. The VIDEO OUT MENU item is valid only when ENC has been selected as the VIDEO OUT setting. For selecting whether the VTR signals or VF signals are to be output from the VIDEO OUT connector. ENC: For VTR output VG: For VF output For selecting the input signals of the VTR to be recorded. CAMERA: For unit's camera signals 1394: For signals from 1394 For selecting the VTR control. LOCAL: For control from the unit only 1394: For control from 1394 For selecting the CAM OUT/VIDEO OUT output setup. For selecting the CAM OUT/VIDEO OUT output setup. When 7.5% is selected, 7.5% setup is also applied to the tape. VTR FUNCTION TIME STAMP REC NO-REC INTERVAL REC OFF ON ONE-SHOT REC TIME 00m05s : 59m59s INTERVAL TIME 00h00m10s : 23h59m59s For selecting whether to superimpose the date and time onto the camera's video recording. REC: For superimposed NO-REC: For not superimposed When REC is selected, select the type of date and time to be superimposed with the TIME/DATE item of sub-menu. For setting whether to perform intermittent recording. OFF: Not performed ON: Performed ONE-SHOT: Recording is performed once for the period set for REC TIME, and then stops. For setting the recording time for intermittent recording. The REC TIME setting is effective only when ON or ONE-SHOT is set for INTERVAL REC. For setting the REC PAUSE time during intermittent recording. The INTERVAL TIME item is valid only when ON has been selected as the INTERVAL REC setting. Item TC MODE Setting options DF NDF UB MODE USER TIME DATE TCG FIRST REC TC REGEN PRESET BACK TALLY ON OFF FF/REW SPEED a32 a64 a100 AUDIO SAMPLING 32K 48K Remarks PAUSE TIME 3min 6min For setting the time that is allowed to elapse before REC PAUSE is replaced with SAVE. 10min For setting the time code to the DF or NDF mode. DF: For drop frame mode NDF:For non-drop frame mode BATTERY For selecting what is to be recorded in the user's bit area. Item Setting options Remarks USER: User setting (fixed) TIME: Real time value in hours/minutes/ seconds DATE: Real time value in year/month/day/ hours TCG: Time code generator value BATTERY SELECT NiCd12 NiCd13 NiCd14 TYPE A TYPE B For selecting the type of battery used. NiCd12: NP-1B made by Sony NiCd13: TRIM13 made by Anton Bauer NiCd14: TRIM14 made by Anton Bauer TYPE A: AJ-BP490 TYPE B:Digital 14 V (Hitron 100) made by For selecting whether the TC REGEN Anton Bauer mode is to be established when recording is started. REGEN: The regeneration mode is established for the time code on the tape. PRESET: The regeneration mode is not established for the time code on the tape. However, it is forcibly established when the unit is transferred from REC PAUSE to REC. For selecting whether the back tally lamp is to light. ON: The lamp lights. OFF:The lamp does not light. TYPE A NEAR END TYPE A END TYPE B NEAR END 11.0V : 11.6V : 15.0V 11.0V : 11.2V : 15.0V 11.0V : 13.0V : 15.0V For designating the type A voltage. When the voltage set here is reached, the battery is considered to have a minimal remaining charge, and a warning is displayed. A voltage from 11.0 V to 15.0 V is used as the setting. For designating the type A voltage. When the voltage set here is reached, the battery is considered to be flat, and a warning is displayed. A voltage from 11.0 V to 15.0 V is used as the setting. For designating the type B voltage. When the voltage set here is reached, the battery is considered to have a minimal remaining charge, and a warning is displayed. A voltage from 11.0 V to 15.0 V is used as the setting. For setting the fast forward and rewind speed. a32: 32 times normal speed a64: 64 times normal speed a100:100 times normal speed TYPE B END 11.0V : 12.5V : 15.0V For designating the type B voltage. When the voltage set here is reached, the battery is considered to be flat, and a warning is displayed. A voltage from 11.0 V to 15.0 V is used as the setting. For selecting the audio sampling frequency. 32K: 32 kHz 48K: 48 kHz " " indicates the factory setting. 34