Panasonic BT-LH910G Operating Instructions - Page 16

VF Function The unit can be connected to broadcasting and business cameras made by Panasonic and used as a VF (viewfinder). If you want to use the unit as a VF (viewfinder), remove the tilt stand (page 17). VF cable (Option) Part number: BT-CS910G VF connector on unit side Camera side VF terminal Camera platform*1(commercially available) *1 Use a camera platform that can fully withstand the weight of the unit (1.7 kg (3.75 lb)). This unit requires a current that exceeds the output rating of a Panasonic camera-recorder, so the external DC power cannot be supplied from the DC output terminal of a Panasonic camera-recorder. Do not use the battery pack. If this unit is mounted on the camera-recorder with the battery pack attached, the camera platform may be damaged. Use an external DC power supply. Contact your vendor for details of broadcasting and business camera-recorders that will be launched in the future. ■■Panasonic camera-recorders that allow the unit to be connected as a VF( viewfinder) Panasonic Camera- VF Video Signals*1 Monitor → Camera VF Communication Camera → Monitor*2 recorder TALLY Indication of YPBPR VIDEO ZEBRA*3 RED*4 GREEN Abnormal Operating State Changing of Aspect (SD Mode Only) AJ-HPX3100G       AJ-HPX3700G     AJ-HPX2700G      AJ-HPX2000/2100       AJ-HDX900      AG-HPX500/502 (Monochrome images      of SD resolution) *1 Configure the menu settings in accordance with the output signal format of the camera (page 48). *2 For the settings, refer to the instruction manual of the camera. *3 The ZEBRA information can be set for the camera (page 37). *4 The tally lamp on the rear of the monitor lights in accordance with the REAR TALLY setting (page 37). 16