Panasonic BT-LH910G Operating Instructions - Page 17

How to Remove the Tilt Stand

Page 17 highlights

How to Remove the Tilt Stand When you do not want to use the tilt stand such as when using the unit as a VF (viewfinder), remove the tilt stand mounting screw (four screws) with a Phillips driver and then remove the tilt stand from the unit. When attaching the tilt stand, make sure to align the protrusions for alignment with the corresponding alignment holes. Alignment hole •• When tilting the monitor, be careful not to trap a hand between the monitor and stand. •• When not using the tilt stand, take care that the unit does not fall over. •• When the unit will be permanently installed in one place, we recommend securing it in place using the screw holes at the bottom of the stand. 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76

17
How to Remove the Tilt Stand
When you do not want to use the tilt stand such as when using the unit as a VF (viewfinder), remove the tilt
stand mounting screw (four screws) with a Phillips driver and then remove the tilt stand from the unit.
When attaching the tilt stand, make
sure to align the protrusions for
alignment with the corresponding
alignment holes.
Alignment hole
<Notes>
When tilting the monitor, be careful not to trap a hand between the monitor and stand.
When not using the tilt stand, take care that the unit does not fall over.
When the unit will be permanently installed in one place, we recommend securing it in place using the
screw holes at the bottom of the stand.