Panasonic BT-LH910G Operating Instructions - Page 50
Display Setup, Description, Wfm/vector, Position, Vector Mode, Vector Scale, Time Code, Mode Select
![]() |
View all Panasonic BT-LH910G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Main Menu (continued) DISPLAY SETUP The underlined values are factory preset setting values. Sub menu Settings Description WFM/VECTOR OFF WFM Y WFM R WFM G WFM B VECTOR Switches between "WFM/VECTOR" waveform and vector display. - Displays waveforms. Displays vector waveforms.*1 POSITION LB RB RT LT Selects the position for the "WFM/VECTOR" waveform display.*1 Left Bottom Right Bottom Right Top Left Top VECTOR MODE × 8 × 4 × 2 × 2S × 1 Enlarges vector waveforms.*1 < × 8> 8 × < × 4> 4 × < × 2> 2 × < × 2S> State in which displayed at scale of 1 x, and only waveforms enlarged to 2 x. < × 1> 1 × VECTOR SCALE 100% 75% Determines the scale of vector waveform. Displays it at 100 % scale. Displays it at 75 % scale. TIME CODE OFF ON Turns the time code display on and off. MODE SELECT LTC VITC LUB VUB Selects time code display mode. Displays linear time code (LTC). Displays vertical interval time code (VITC). Displays user bits included in LTC. Displays user bits included in VITC. CLOSED CAPTION OFF ON Turns closed caption display on and off.*2 CC TYPE CEA-608 CEA-708 Selects the closed caption display mode. Displays data compliant with CEA-608. Displays data compliant with CEA-708. CAPTION CHANNEL CC4 CC3 CC2 CC1 Selects the closed caption display channel for when CEA-608. CAPTION SERVICE SRV6 SRV5 SRV4 SRV3 SRV2 SRV1 Selects the closed caption display service for when CEA-708. *1 Opens the vector display during SDI signal input. *2 Available during VIDEO input. Closed captions appear as bright lines on line 21 when closed caption is set to ON and underscan is also on. 50
![](/manual_guide/products/panasonic-btlh910gj-operating-instructions-0f91241/50.png)