Panasonic BT-LH910G Operating Instructions - Page 42

Main Menu (continued) ■■"SUB WINDOW" Opening the "SUB WINDOW" function splits the screen (main window) in two as shown below to enable comparison of a recorded still image with live video. Use the "SUB WINDOW" setting (FULL, PART) in the "SYSTEM CONFIG" menu (page 34) to set up the function as shown below. Press the button ([FUNCTION1] to [FUNCTION3] (page 38)) to which the "SUB WINDOW" function has been assigned to turn the function on and off. •• This assumes that the "SUB WINDOW" function has been assigned to any of the [FUNCTION1] to [FUNCTION3] buttons. To setup "I-P MODE" (page 31), exit the "SUB WINDOW" function first. •• FULL Resizes the main window to also display a second window (two sub-windows). Press the FUNCTION button to which the SUB WINDOW function has been assigned. Normal window (main window) Press the button again Before memory (two sub-windows) Press the button again After memory (two sub-windows) Video Video Video Still image Video (Left side is stored in memory.) •• PART Resizes the main window to show only its center to also display a second image (two sub-windows). Press the FUNCTION button to which the SUB WINDOW function has been assigned. Normal window (main window) Press the button again Before memory (two sub-windows) Press the button again After memory (two sub-windows) Video Crops the image to show its center part Video Video The cropped main window image is placed side by side with a second image Still image Video (Left side is stored in memory.) These examples show 16:9 aspect ratio images. Note on FULL/PART selection This function is designed to enable comparison of identical formats input to the same input terminal. Input of different formats via different input channels may distort the sub-window (left side, still image) or blanking could occur. However, input of an identical format signal to the input terminal during still image acquisition will display correctly. 42