Panasonic BT-LH910G Operating Instructions - Page 57

3D Assist Mode (continued) VERTICAL (Vertical Offset Check) This function enables you to operate two horizontal line markers to check the number of lines between markers in the displayed image and check vertical offset, which tends to cause eye fatigue. Screen: The L/R 2 screens are shown side-by-side, and two markers are shown. 13 Lines DISP 384 384 VTCL EXPAND MARKER1 MARKER2 FUNC. •• The number of lines of the displayed image is measured and then the number of lines between the two horizontal line markers is displayed at the bottom left of the screen. •• Displaying horizontal line markers makes it easy to check the left/right vertical offset. •• If the vertical offset becomes large, discomfort will be felt and stereoscopic vision will become difficult when the mode is set to 3D so make adjustments trying your hardest to eliminate camera vertical offset. Sub menu EXPAND Operation Knob1 (press) Settings DISP ×1 ×2 The underlined values are factory preset setting values. Description Selects the display screen. Displays the full screen. (x1) Displays the screen with the actual number of pixels (PIXEL TO PIXEL) (x2) Expands the actual number of pixels to x2 in the vertical direction only and then displays the screen. Knob1 (turn) MARKER1 MARKER2 Knob2 (turn) Knob3 (turn) T C B 0 - 384 - 767 0 - 384 - 767 Selects the display position for when the EXPAND setting is x1 or x2.*1 Displays the top of the input image. Displays the center of the input image. Displays the bottom of the input image. Shifts the upper horizontal line marker up or down.*2 Shifts the lower horizontal line marker up or down.*2 *1 When the signal format is 720P, the display position of the image is not shifted when x1 display. *2 The two horizontal line markers are each indicated by two lines, and the position of the upper line is indicated. 57