Panasonic BT-LH910G Operating Instructions - Page 20
Audio level meter display, Time code (TC) display, Display color, In VITC and LTC display mode
View all Panasonic BT-LH910G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
On-screen Display (continued) Audio level meter display Channel display Reference point 0 dB point 1 2 3 4 5 6 7 8 SDI1 1080/60i •• A color skeleton bar meter indicates the audio level for SDI signals and HDMI signals. •• The display method of the audio level meter can be set in the menu (page 49). •• In 3D assist mode, the audio of the SDI1 (L) side is indicated. Display color Green: Up to reference point (included) Yellow: Reference point (not included) to 0 dB point Red: Overrange Peak hold Overrange Time code (TC) display ( : ) NDF ( . ) DF •• Use the menu to display the time code for HD-SDI signal input. It also allows you to switch display mode (VITC, LTC, VUB, LUB). (page 50) In VITC and LTC display mode: •• Displays the time code in hours: minutes: seconds: or frames. •• In drop-frame mode, a different delimiter between seconds and frames is used. Note : Read errors are displayed as In VUB and LUB display modes: •• BG8, BG7, BG6, BG5, BG4, BG3, BG2, BG1 appear in the stated order. BG: binary group •• The (:) delimiter does not appear. Note : Read errors are displayed as 20