Panasonic BT-LH910G Operating Instructions - Page 63

REMOTE Specifications (continued) Assigned item Function Operating conditions GAMMA SEL. STDIO/ PST Switches the gamma curve to STDIO/PST Level operation (Short-circuited: mode. STDIO/ PST mode, Open: STANDARD mode) INPUT SEL. VIDEO Switches the input line to VIDEO. Edge operation INPUT SEL. SDI1 Switches the input line to SDI1. Edge operation INPUT SEL. SDI2 Switches the input line to SDI2. Edge operation INPUT SEL. HDMI Switches the input line to HDMI. Edge operation INPUT SEL. YPBPR Switches the input line to YPBPR. Edge operation INPUT SEL. VF Switches the input line to VF. Edge operation INPUT SEL. INT SG Switches the input line to INT SG. Edge operation MONO Switches between color and monochrome Level operation (Short-circuited: (MONO). monochrome, Open: color) R-TALLY *3 Lights the red tally. Level operation (Short-circuited: ON, Open: OFF) G-TALLY *3 Lights the green tally. Level operation (Short-circuited: ON, Open: OFF) PIXEL TO PIXEL Switches screen display between input size and display size. Level operation (Short-circuited: ON, Open: OFF) FOCUS-IN-RED Displays the outlines of the subject that are in focus in red Level operation (Short-circuited: ON, Open: OFF) REMOTE STANDBY *4 *5 Sets remote standby (turns off the backlight, and turns off the power of devices that are not required). Level operation (Short-circuited: ON, Open: OFF) *3 When "R-TALLY" and "G-TALLY" simultaneously go on, the tally color changes to orange. *4 When remote standby is set to ON, the CONT. and B.LIGHT LEDs on the front flash. *5 If the GPI terminal to be assigned is set to a short-circuited state first and then MENU is operated to set this item, the backlight turns off and the screen display disappears, so MENU operation becomes unable to be checked. To change the setting of this item, be sure to set it when the GPI terminal is in the open state. Restrictions •• SD ASPECT does not operate when the input signal is HD. •• The MARKER items do not operate when the input line of the signal is VF. •• SD ASPECT, SCAN, WFM/VECTOR, MARKER, PIXEL TO PIXEL, and PIXEL POSITION do not operate in SUB WINDOW mode. •• SCAN and MARKER do not operate in PIXEL TO PIXEL mode. •• GAMMA SELECT, SD ASPECT, SCAN, MARKER, and MONO do not operate when the input line of the signal is HDMI and the signal format is 640 x 480. ■■Priority of assigned functions •• When both "MARKER1" and "MARKER2" are activated at the same time, "MARKER1" has priority. However, when the display aspect ratio is 4:3, the "MARKER1" aspect ratio is 16:9 and the "MARKER2" aspect ratio is 4:3, "MARKER2" is displayed. In this case, the "MARKER2" background is controlled. •• When "MARKER BACK HALF" and "MARKER BACK BLACK" are activated at the same time, "MARKER BACK BLACK" has priority. •• INPUT SEL. are prioritized in the order of "INPUT SEL. VIDEO," "INPUT SEL. SDI1," "INPUT SEL. SDI2," "INPUT SEL. HDMI," "INPUT SEL. YPBPR," "INPUT SEL. VF," and "INT SG." •• When "GAMMA SEL. FILM" and "GAMMA SEL. STDIO/PST" are activated at the same time, "GAMMA SEL. FILM" has priority. 63