Panasonic CT32SC13G Service Manual - Page 13

Apply a monoscope pattern.

Get Panasonic CT32SC13G - 32inch COLOR TV-ANALOG PDF manuals and user guides View all Panasonic CT32SC13G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

http://tsn.pstc.panasonic.com/viewing/NA/CT-36SL13G/SVC/s0201000000.html 1. Connect the short jumper between TPD16 & TPD17. 2. Connect the jumper diode between TPD14 and TPD15 (anode connected to TPD15 and cathode to TPD14). 3. Apply 75VAC to AC input of isolation transformer. 4. Turn the receiver on. 5. Apply a monoscope pattern. 6. Set customer picture and brightness controls to the minimum. 7. tSet current within 50A to 100A by changing the picture and bright controls. 8. Slowly increase AC voltage at the input of the isolation transformer and confirm HHS voltage measure 36kV . 9. Turn power off and remove jigs. TOP PREVIOUS NEXT http://tsn.pstc.panasonic.com/viewing/NA/CT-36SL13G/SVC/s0201000000.html (2 of 2)05.12.2008 0:00:36

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
1.
Connect the short jumper between TPD16 & TPD17.
2.
Connect the jumper diode between TPD14 and TPD15 (anode connected to TPD15 and cathode
to TPD14).
3.
Apply 75VAC to AC input of isolation transformer.
4.
Turn the receiver on.
5.
Apply a monoscope pattern.
6.
Set customer picture and brightness controls to the minimum.
7.
tSet current within 50
μ
A to 100
μ
A by changing the picture and bright controls.
8.
Slowly increase AC voltage at the input of the isolation transformer and confirm HHS voltage
measure
36kV
.
9.
Turn power off and remove jigs.
TOP
PREVIOUS
NEXT