Panasonic HC-X1500 HC-X1500 Advanced Operating Manual - Page 157
Output format, Format that can be output from the <SDI OUT> terminal [X2000]
View all Panasonic HC-X1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Output format Chapter 7 Output and Screen Display - Output format The format to be output differs depending on the setting in the [SYSTEM] menu → [FREQUENCY]/[REC FORMAT]. Format that can be output from the terminal [X2000] The format that can be output from the terminal differs with following combination of the settings. ≥ [SYSTEM] menu → [FREQUENCY] ≥ [SYSTEM] menu → [REC FORMAT] ≥ [VIDEO OUT/LCD/VF] menu → [SDI OUT] → [OUT FORMAT] [FREQUENCY] [59.94Hz] [50.00Hz] Item [REC FORMAT] Resolution Frame rate 3840×2160 59.94p 29.97p 23.98p 1920×1080 59.94p 59.94i 29.97p 23.98p 1280×720 3840×2160 59.94p 50.00p 25.00p 1920×1080 50.00p 50.00i 25.00p 1280×720 50.00p [OUT FORMAT]: Output Format [1920×1080p]: [1920×1080i]*: [1920×1080p]: [1920×1080PsF]*: [1920×1080p]: [1920×1080PsF]*: [1920×1080p]: [1920×1080i]*: [1920×1080i]: [1920×1080p]: [1920×1080PsF]*: [1920×1080p]: [1920×1080PsF]*: [1280×720p]: [1920×1080p]: [1920×1080i]*: [1920×1080p]: [1920×1080PsF]*: [1920×1080p]: [1920×1080i]*: [1920×1080i]: [1920×1080p]: [1920×1080PsF]*: [1280×720p]: 1920×1080/59.94p 4:2:2 10 bit 1920×1080/59.94i 4:2:2 10 bit 1920×1080/29.97p 4:2:2 10 bit 1920×1080/29.97PsF 4:2:2 10 bit 1920×1080/23.98p 4:2:2 10 bit 1920×1080/23.98PsF 4:2:2 10 bit 1920×1080/59.94p 4:2:2 10 bit 1920×1080/59.94i 4:2:2 10 bit 1920×1080/59.94i 4:2:2 10 bit 1920×1080/29.97p 4:2:2 10 bit 1920×1080/29.97PsF 4:2:2 10 bit 1920×1080/23.98p 4:2:2 10 bit 1920×1080/23.98PsF 4:2:2 10 bit 1280×720/59.94p 4:2:2 10 bit 1920×1080/50.00p 4:2:2 10 bit 1920×1080/50.00i 4:2:2 10 bit 1920×1080/25.00p 4:2:2 10 bit 1920×1080/25.00PsF 4:2:2 10 bit 1920×1080/50.00p 4:2:2 10 bit 1920×1080/50.00i 4:2:2 10 bit 1920×1080/50.00i 4:2:2 10 bit 1920×1080/25.00p 4:2:2 10 bit 1920×1080/25.00PsF 4:2:2 10 bit 1280×720/50.00p 4:2:2 10 bit * Factory setting @ NOTE 0 The 3840×2160 output is not supported. 0 User bits are not displayed. 0 [OUT FORMAT] restores the factory settings when the settings of [FREQUENCY] and [REC FORMAT] change and the current setting values of [OUT FORMAT] cannot be acquired. 0 The output format when playing back from the thumbnail screen is as follows. j It will be the value set in [OUT FORMAT] when the recording resolution of the playback clip is the same as [REC FORMAT]. j It will be factory setting of [OUT FORMAT] when the recording resolution of the playback clip is different from [REC FORMAT]. 0 There may be a fews seconds of images not displayed on the external device when the clips are changing over, etc. - 157 -