Panasonic HC-X1500 HC-X1500 Advanced Operating Manual - Page 30
Standard charging time and recordable time, Checking the remaining battery level
![]() |
View all Panasonic HC-X1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Chapter 3 Preparation - Power supply Standard charging time and recordable time Battery parts number AG-VBR59 (supplied/optional) VW-VBD58 (optional) Voltage/capacity (minimum) 7.28 V/5900 mAh 7.2 V/5800 mAh Charging time for main unit Approx. 5 h 30 min Approx. 5 h 15 min [FREQUENCY] [59.94Hz] [50.00Hz] [59.94Hz] [50.00Hz] Continuous recordable time X1500 Approx. 5 h 20 min Approx. 5 h 40 min Approx. 5 h 15 min Approx. 5 h 35 min X2000 Approx. 4 h 35 min Approx. 4 h 50 min Approx. 4 h 30 min Approx. 4 h 45 min ≥ "h" is an abbreviation for hour and "min" for minute. ≥ The charging time is the time when the operating ambient temperature is 25 °C (77 oF) and operating relative humidity is 60%. At other temperature and humidity the charging time may take longer. ≥ Continuous recordable time is the time when the unit is used fulfilling all of the following conditions. If you use the unit in other conditions, continuous recordable time will shorten. j When set to the factory default menu settings ([FILE FORMAT] is [MOV] and [REC FORMAT] is [2160-59.94p/HEVC LongGOP 200M]/[2160-50.00p/ HEVC LongGOP 200M]) j When the LCD monitor is used and cable is not connected to the external input/output terminal ¥ The charging time is the time to charge when the charging capacity of the battery is used up. The charging time or the continuous recordable time differs depending on the use condition such as high or low temperature. ∫ Batteries that support quick charging For quick charging of a battery (AG-VBR59: supplied/optional), use a battery charger (AG-BRD50: optional). @ NOTE 0 Battery is warm after using or after charging, but this is not a malfunction. Checking the remaining battery level The remaining battery level can be checked with the power status display on the LCD monitor or the indicator on the supplied battery. Checking the remaining battery level with the LCD monitor The battery status display will change as → → → → → while the remaining battery level gets lower. It will flash in red when the remaining battery level is zero. @ NOTE 0 The power status display may not be displayed depending on the setting in the menu. 0 Repair or copy of the clip, or update of the firmware is not possible when it is flashing in red. Checking the remaining battery level with the battery ≥ The remaining battery level can be checked with the indicator display by pressing the button on the battery when it is not charging. j The remaining battery level is a rough indication. j The indicator will not illuminate even if the button is pressed when the remaining battery level is zero. Charge the battery. ≥ The progress of the charging is notified by the flashing position of the indicator while the battery is charging. Once the charging is completed, the indicator turns off. パ 1 Indicator 2 button 1 2 ∫ Display of the indicator ≥ The color and illuminate/flashing status of the indicator indicated by the icon in the table are as follows. j : Flashing in green j : Illuminated in green j : Off Indicator display When checking the remaining battery level Charging Remaining battery level/charging progress 0% to 25% 25% to 50% 50% to 75% 75% to 100% ≥ Display of the indicator is a rough indication. If the battery is attached to the unit or the battery charger (optional), check the remaining level on the device the battery is attached to. The remaining level may differ from the one displayed with the indicator on the battery. - 30 -
![](/manual_guide/products/panasonic-hcx1500-hcx1500-advanced-operating-manual-40ef178/30.png)