Panasonic HC-X1500 HC-X1500 Advanced Operating Manual - Page 76
Operation, Menu settings, SDI REC REMOTE], SDI OUT CHAR], OUT FORMAT], HDMI TC OUT]
View all Panasonic HC-X1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Chapter 4 Operation - Menu settings [SDI REC REMOTE] Sets if the recording operation against the external equipment connected to the terminal (such as recorder) is to be controlled or not. [ON] Controls the recording operation of the external equipment. [OFF] Does not control the recording operation of the external equipment. (Factory setting: [OFF]) @ NOTE 0 This cannot be set when the [RECORDING] menu → [REC FUNCTION] → [REC MODE] is set to [INTERVAL]. 0 The AUTO REC signal is compatible with TYPE3 when remotely recording with SDI. [SDI OUT CHAR] Sets whether to superimpose the character to the output from the terminal. [ON] Superimposes. [OFF] Does not superimpose. (Factory setting: [OFF]) [SDI OUT ZEBRA] Sets whether to superimpose the zebra signal to the output from the terminal. The settings of the zebra signal follow the zebra signal settings in the [VIDEO OUT/LCD/VF] menu → [EI ASSIST]. [ON] [OFF] (Factory setting: [OFF]) Superimposes. Does not superimpose. [HDMI OUT] ¥ Set the [VIDEO OUT/LCD/VF] menu → [VIDEO OUT SEL] to [HDMI]. [OUT FORMAT] Selects the signal to output from the terminal. The items that can be selected differ depending on the [SYSTEM] menu → [FREQUENCY]/[FILE FORMAT]/[REC FORMAT] setting. [3840×2160p] [3840×2160p(420/8bit)] [1920×1080p] [1920×1080i] [1280×720p] [720×480p] [720×576p] Outputs in 3840×2160p (4:2:2/10 bit). Outputs in 3840×2160p (4:2:0/8 bit). Outputs in 1920×1080p. Outputs in 1920×1080i. Outputs in 1280×720p. Outputs in 720×480p. Outputs in 720×576p. (Factory setting: [1920×1080p]) @ NOTE 0 For the combinations that can be set, refer to "Format that can be output from the terminal". (l 158) [HDMI TC OUT] Sets if the time code information is output or not in the output from the terminal. The items that can be set are as follows. ≥ [ON], [OFF] (Factory setting: [OFF]) [HDMI REC REMOTE] Sets if the recording operation against the external equipment connected to the terminal (such as recorder) is to be controlled or not. This can be set when [HDMI TC OUT] in [HDMI OUT] is enabled. [ON] Controls the recording operation of the external equipment. [OFF] Does not control the recording operation of the external equipment. (Factory setting: [OFF]) @ NOTE 0 This cannot be set when the [RECORDING] menu → [REC FUNCTION] → [REC MODE] is set to [INTERVAL]. [HDMI OUT CHAR] Sets whether to superimpose the character to the output from the terminal. [ON] [OFF] (Factory setting: [OFF]) Superimposes. Does not superimpose. - 76 -