Panasonic HC-X1500 HC-X1500 Advanced Operating Manual - Page 87

Chapter 4 Operation - Menu settings [START TRIGGER] Sets whether to start streaming with operation of the unit or operation of the application software. The items that can be set are as follows. ≥ [CAMERA], [RECEIVER], [RECEIVER(MULTICAST)] (Factory setting: [RECEIVER]) [CONNECTION INFO.] Selects the internal memory of the unit or the memory card as the reference location for the transfer destination when starting a stream with the operation of the unit. The items that can be set are as follows. ≥ [MEMORY], [SD CARD] (Factory setting: [MEMORY]) [RECEIVER URL] Enter the destination URL in following format. ≥ rtmp://(server URL):(port number)/(path)/(stream key) ≥ rtmps://(server URL):(port number)/(path)/(stream key) [RTSP PORT] Assigns the TCP communication port number used for initial RTSP negotiation. (Factory setting: [554]) @ NOTE 0 The following port numbers cannot be set: j 0, 20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 995, 10669, 10670, 59000 to 61000 0 This unit is generally compatible with the RTSP protocol. The URL for RTSP requests is as follows: rtsp:///stream 0 [RTSP PORT] settings are not possible in the following case: j When the setting is other than the [NETWORK] menu → [STREAMING] → [START TRIGGER] → [RECEIVER] [MULTICAST ADDRESS] Sets the address when using the streaming with the multicast. (Factory setting: [239.192.0.20]) [MULTICAST PORT] Sets the port number when using the streaming with the multicast. (Factory setting: [37004]) [LOAD (SD CARD)] Loads the settings file from the memory card and reflects in the menu when [CONNECTION INFO.] is set to [MEMORY]. The items that can be selected are as follows. ≥ [YES], [NO] [SAVE (SD CARD)] Encrypts and saves the information of the destination URL to the memory card. The items that can be selected are as follows. ≥ [YES], [NO] [START] Starts streaming. The items that can be set are as follows. ≥ [ON], [OFF] (Factory setting: [OFF]) [WLAN PROPERTY] Performs settings related to the wireless LAN. [TYPE] Sets the connection method to the wireless LAN. [DIRECT] [INFRA(SELECT)] [INFRA(MANUAL)] (Factory setting: [DIRECT]) It can connect directly without using a wireless access point to a device equipped with wireless LAN such as a tablet terminal. Connects to the wireless access point. The access point is selected from the list. Connects to the wireless access point. Wireless access point is entered manually. [SSID] Enters or displays the network name of this unit or the wireless access point (SSID). Select the following items to set this unit's SSID. ≥ The [NETWORK] menu → [WLAN PROPERTY] → [TYPE] → [DIRECT] Enter the SSID for this unit using 32 characters or less. ≥ Factory default value for this unit's SSID: The model number of the unit you are using is set. (For example: [HC-X2000], etc.) - 87 -