Panasonic KX-TA82492 Installation Manual - Page 84
System Reset with System Data Clear
UPC - 037988851416
View all Panasonic KX-TA82492 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
4.1 Troubleshooting 4.1.5 System Reset with System Data Clear When the PBX does not operate correctly after restarting, you can clear the programming data stored in the PBX. The PBX will restart with the default settings. 1. Make sure that all outside (CO) lines you use are connected to the PBX. 2. Slide the System Clear Switch to the "CLR" position. 3. Press the Reset Button, and then return the System Clear Switch to the "NOR" position before the power indicator stops flashing. (The power indicator will flash for about 5 seconds.) CAUTION Before touching the System Clear Switch and Reset Button, put on a grounding strap. Notes • • After pressing the Reset Button, make sure to return the System Clear Switch to the "NOR" position before the power indicator stops flashing, otherwise the system data will not be cleared. The recorded OGMs for DISA and Built-in Voice Message are not cleared by the System Data Clear. System Clear Switch RESET NOR/CLR Reset Button Programming Manual References [999] System Data Clear 8.3 System Reset 8.4 System Data Clear 84 Installation Manual