Panasonic WJ-NV300 Installation Guide - Page 15
Precautions for use - wj nv300k g pdf
View all Panasonic WJ-NV300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Precautions for use Power source The input power source for this product is 120 V AC 60 Hz (WJ-NV300K), 220 V - 240 V AC 50 Hz/ 60 Hz (WJ-NV300K/G). Do not connect to the outlet that provides the power to equipment that requires a measurable amount of power (such as a copy machine, air conditioner, etc.). Avoid placing this product in locations where is subject to water. * The provided power cord(s) is (are) dedicated to the use with this product. Do not use with any other device. Also, do not use any other power cord with this product. Ambient operating temperature Use this product at temperatures between +5 °C to +45 °C {41 °F to 113 °F}. Failure to do so may damage the internal parts or cause malfunction. * Performance and lifetime of hard disk drives are easily affected by heat (used at high temperature). It is recommended to use this product at a temperature of approx. +25 °C {77 °F}. To cut the power supply This product has no power switch. To cut the power supply, unplug the power plug of the product from the AC outlet. If it is hard to unplug the power cord due to the installation conditions, connect the power cord of the product to the AC outlet via the circuit breaker of a distribution board or to the AC inlet socket of a power supply control unit. Built-in backup battery • Do not expose the built-in battery to excessive heat such as sunlight, fire, etc. • Before the first use, charge the built-in backup battery (lithium battery) by turning on the power for 48 hours or more. If it is not charged enough, in a case where the power goes down, the operative condition may be different to that before the electric power failure. For example, the internal clock may keep bad time or logs may be lost. • The built-in battery life is approximately 5 years as an indication of replacement. (The built-in battery life may become shorter depending on the use condition.) Replace the built-in battery after 5 years of use. ("5 years of use" is just an indication of replacement. We are not providing any guarantee of the built-in battery lifetime.) When the built-in battery life runs out, some settings such as the date & time setting will not be saved once the power is turned off. • Ask your dealer when replacement of the battery is required. Hard disk drive (HDD) • Hard disk drives are precise devices. Handle them with care. It is possible to damage them if they are moved while their motors are still running. • Please be forewarned that any loss of information on the HDD is not guaranteed under any circumstances. • Do not move or install this product just after turning the power on or off (for around 30 seconds.) The hard disk drives are running. • The lifetime of hard disk drives is limited by use. Write errors may occur frequently after around 20 000 hours of operation, and the head and motor deterioration may occur after around 30 000 hours of operation. They will reach the end of their lifetime after 30 000 hours of operation if they have been used at the recommended ambient temperature (approx. +25 °C {77 °F}). • To prevent data loss from disk crashes, it is recommended to keep the ambient operating temperature at approx. +25 °C {77 °F} and to replace them after around 18000 hours of operation. • When hard disk drive trouble occurs, replace it immediately. Contact your dealer about servicing. About SDHC/SD memory card • When using an unformatted SDHC/SD memory card, format it with this product. Recorded data on the SDHC/ SD memory card will be deleted when formatted. If an unformatted SDHC/SD memory card or an SDHC/SD memory card formatted with other devices is used, the product may not work properly or performance deterioration may be caused. Refer to the Operating Instructions (PDF) for how to format a SDHC/SD memory card. • When some SDHC/SD memory cards are used with the product, the product may not work properly or performance deterioration may be caused. Use the SDHC/SD memory cards recommended in (page 46). Memory cards other than SDHC/SD memory card are not supported. • Refer to page 19 for how to insert/remove a SDHC/SD memory card. About external storage devices (External HDD and USB memory) • An external hard disk drive or a USB memory that is compatible with USB2.0 can be connected to the copy port to use as the external storage device. • The external hard disk drive cannot be formatted with this recorder. Use the external storage device formatted in FAT (FAT16) or FAT32. Refer to the operating instructions of the connected external storage device for the format procedure. • Do not use any external storage device with the password authentication function since they are not supported. Prevent condensation from forming If this happens, it can cause malfunction. Leave it switched off for around 2 hours in the following cases. • When this product is placed in an extremely humid place. • When this product is placed in a room where a heater has just been turned on. • When this product is moved from an air-conditioned room to a humid and high-temperature room. About the monitor When displaying the same image on the PC monitor for a long time, the PC monitor may be damaged. 15