Panasonic WJ-NV300 Installation Guide - Page 34
Turn on the recorder
View all Panasonic WJ-NV300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Turn on the recorder Turn on the power of the recorder Turn on the power of the recorder. When using the recorder for the first time, register the license for the recorder. (☞ Page 36) Step 1 Connect the provided power cord to the power cord inlet on the rear panel of the recorder, and insert the power plug to an outlet whose rating is as follows. WJ-NV300K: 120 V AC, 60 Hz WJ-NV300K/G: 220 V - 240 V AC, 50 Hz/60 Hz →→ The [OPERATE] indicator will light, the system check of the recorder and the hard disk drives will start, and the startup window will be displayed on the main monitor. Step 2 If the "Registration Key" for the recorder has not been registered yet, register the "Registration Key" by following the procedures on page 36. Note: • When the "Login" window is displayed during operation after startup, enter the user name and password. Refer to the Operating Instructions (PDF) for descriptions of how to operate. • The default administrator name and password are as follows. Administrator name : ADMIN Password : 12345 • If the "Registration Key" for the recorder is once registered, the message asking you to register the "Registration Key" will not be displayed from the next time. Important: • Never turn off the power of the recorder during startup. Note: • If the license for the recorder has not been registered yet, the message asking you to register the "Registration Key" will be displayed. 34