Panasonic WJ-NV300 Installation Guide - Page 43

Undetectable: Cannot obtain images from the camera. Authentication error: Failed in the authentication to dis- play images from the camera. Important: • If "Undetectable" is displayed, check the camera con- nections, and retry the camera registration. • If "Authentication error" is displayed, initialized the cam- era and retry the camera registration by referring to the operating instruction of the camera. • If the registered camera is not correctly detected or if you wish to change the camera settings, change the registered information on the "Basic setup" menu - the "Camera" page - the "Camera registration" tab. (☞ Operating Instructions (PDF)) [Refresh] button Obtain the latest camera image after interchanging cameras. [Exit] button Exits the setup menu and returns to the top screen of the setup menu. [Next] button Proceeds to the settings for recording. Step 8 Perform the settings for recording. If the settings are performed on "Easy Start", the settings will be applied to all the cameras. [Image quality] Selects the image quality of recorded images. NQ (Normal): Standard quality FQ (Fine): High quality SF (Super Fine): Super fine quality XF (Extra Fine): Extra fine quality Default: FQ Note: • If "XF" is selected when the compression method of the camera is "MJPEG", "SF" will be set instead of "XF". [Referenced recording days] Calculates and displays the total number of days for which recording on the hard disk drives is available. Note: • The referenced recording days will be calculated based on the assumption that recording is started on Monday. • The HDD consumption for the event recording will be excluded. • If a camera manufactured by other than Panasonic is used, the value of "Referenced recording days" will not be displayed. • When configured to perform recording in high resolution and high quality, recording may sometimes not be performed at the specified rate. When there may be possibility to fail recording at the specified rate while using only Panasonic cameras, the confirmation window will be displayed. Step 9 Click the [Exit] button. →→ Saves the settings and returns to the top screen of the setup menu. [Frame rate] Select the recording frame rate. 1 ips/ 3 ips/ 5 ips/ 10 ips/ 15 ips/ 30 ips Default: 10 ips Note: • To apply 60 ips, configure on "Advanced recording setup" on the "Recording setup" tab under "REC & event" of "Basic setup". 43