Panasonic WJ-NV300 Installation Guide - Page 27
detected automatically.
View all Panasonic WJ-NV300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
When the PC and the cameras are not on the same network and it is impossible to directly access the cameras from the PC, connect the PC to the PC port. Recorder AC IN SIGNAL GND HDD 2 VIDEO AUDIO OUT ALARM/ CONTROL [Camera/PC port] IP address: 192.168.0.250 Subnet mask: 255.255.255.0 Default gateway: 192.168.1.1 [PC port] IP address: 192.168.1.250 Subnet mask: 255.255.255.0 HDD 1 EXT STORAGE 2 1 10/100/1000BASE-T AV OUT PC CAMERA/PC MAIN VIDEO OUT SUB PC IP address: 192.168.1.x (except 0, 1, 250 and 255) Subnet mask: 255.255.255.0 Default gateway: 192.168.1.1 LAN cable (locally procured) 10BASE-T/100BASE-X/1000BASE-T: category 5e or better (straight) for WJ-NV300K, category 7 (straight) for WJ-NV300K/G LAN cable (locally procured) 10BASE-T/100BASE-X/1000BASE-T: category 5e or better (straight) for WJ-NV300K, category 7 (straight) for WJ-NV300K/G Network Switching hub Switching hub ɾɾɾ Network camera (x 32 max.) Note: • Cameras shall be connected to the camera/PC port. If the camera is connected to the PC port, the camera will not be detected automatically. 27