Panasonic WJ-NV300 Installation Guide - Page 18

Major operating controls and their functions Front view q Status indicators w Buzzer stop button ERROR OPERATE COPY REC ALARM BUZZER STOP MOUSE t SDHC/SD memory card slot r Restart button e Copy port (This illustration represents WJ-NV300K.) * The copy port has a certain connecting direction. When it is hard to connect, do not forcibly connect and check the direction of the connector. q Status indicators ERROR: Blinks when an error that can become a problem for the recorder to run the system occurs. Blinks red: System error Blinks orange: Thermal error, cooling fan malfunction, etc. OPERATE: Lights when the power is on. HDD [HDD1]/[HDD2]: Indicates the operational status (access/failure) of the respective hard disk drive. Blinks green: Indicates that the respective hard disk drive is being accessed. Lights red: Indicates that a fault (or an error) has occurred on a hard disk drive. Off: Indicates that the respective hard disk drive is not being accessed. REC: Lights orange when recording is being performed. ALARM: Blinks when an alarm occurs, and lights when the alarm output stops. This indicator will go off when the [Reset] button (☞ Operating Instructions (PDF)) is clicked. w Buzzer stop button [BUZZER STOP] Press this button to stop the buzzer that started sounding at an alarm/error occurrence. Refer to the Operating Instructions (PDF) for further information about alarms and errors. e Copy port [COPY] Connect an external storage device (external Hard disk drive, USB memory) to this port and copy images and audio recorded on the hard disk drive. r Restart button [RESTART] Press this button to reboot the recorder. When pressing this button, use a sharp object such as a clip. t SDHC/SD memory card slot Recorded images and audio can be copied onto an SD memory card inserted in this slot (☞ page 19). 18