Panasonic WJ-NV300 Installation Guide - Page 36

Register the license (Registration Key) When using the recorder for the first time, or to increase number of the cameras to be connected, it is necessary to register the license (Registration Key) of the recorder. Important: • In the following cases, the recorder must be rebooted by clicking the [Restart] button. The licenses will not be effective until the recorder is rebooted. • When the Registration Key of the recorder is registered • When the licenses of the additional camera kit or any other additional/extension kit is added • The added cameras shall be registered on "Easy start" (☞ page 41) or on the "Camera registration" tab. Each setting value is the default. Configure each setting according to your needs. Step 1 Obtain the "Registration Key" for the recorder by following the instructions on the provided "Activation Key Card". To increase number of the connected camera, get the additional camera registration key number described on the Activation Key Card packaged in the Additional Camera Kit (WJ-NVE30, WJ-NVE30W: optional) When using the extra functions, obtain the "Registration Key" for Additional Business Intelligence Kit WJ-NVF30, WJ-NVF30W (option). Refer to the "Activation Key Card" for further information. →→ The setup menu will be displayed. Step 2 Start the recorder. (☞ Page 34) →→ When the system check is complete, the operational screen will be displayed on the main monitor. If the license for the recorder has not been registered yet, the message asking you to register the license will be displayed. Step 4 Click [Advanced setup] - [Maintenance] - the [System management] tab on the setup menu. →→ The "System management" page will be displayed. Step 3 Click the [Setup] button. 36