Panasonic WJ-NV300 Installation Guide - Page 28
Connection of extension units
View all Panasonic WJ-NV300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Connection of extension units Up to 2 extension units (optional) can be connected with a single network disk recorder. Connect the recorder and the extension unit using the connection cable provided with the extension unit. Connect the extension units (WJ-HDE400) as shown in the illustration below. Refer also to the operating instructions of the extension unit. When the extension units are connected, the RAID5 or RAID6 function will become available. Refer to the Operating Instructions (PDF) for descriptions of how to use the RAID function. Fix the connection cable Attach the cable clamp to each connection cable. AC IN SIGNAL GND HDD 2 VIDEO AUDIO OUT ALARM/ CONTROL Recorder HDD 1 EXT STORAGE 2 1 21 10/100/1000BASE-T AV OUT PC CAMERA/PC MAIN VIDEO OUT SUB Connection cable (provided with the extension unit) Extension unit (unit number 2) Extension unit (unit number 1) Important: • Use only the dedicated connection cable provided with the extension unit when connecting the recorder and the extension unit. • Fix the connection cable firmly using the cable clamp provided with the extension unit. When the cable is not connected firmly or when it is disconnected, the system may become unstable or recording may fail. • Do not bind the looped cable. 28