Panasonic WVNP1004 WVNP1004 User Guide - Page 30

Configure the alarm settings [Alarm setup] The settings relating to alarm occurrences such as settings for the alarm action at an alarm occurrence, the alarm occurrence notification, and the VMD area settings can be configured on this page. The "Alarm setup" page has 3 tabs of the [Alarm] tab, the [VMD area] tab and the [Notification] tab. Configure the settings relating to the alarm action [Alarm] Click the [Alarm] tab on the "Alarm setup" page. The settings relating to the alarm action can be configured on this page. Refer to pages 31 and 32 for further information about the settings relating to the alarm image and the alarm out connector. [Originating port number] Select a port number to be used to receive the command alarm. Available port number: 1 - 65535 Default: 8181 [Scene change detection alarm] Select "ON" or "OFF" to determine whether or not to perform the alarm action when the camera lens is covered by something such as a cloth, or when the shooting direction of the camera is moved. Default: OFF [Terminal alarm] Select "ON" or "OFF" to determine whether or not to receive the terminal alarm. Default: OFF [Level setup] Select the sensitivity of the scene change detection alarm function from the following. Level 1/Level 2/Level 3 Default: Level 1 [VMD alarm] Select "ON" or "OFF" to determine whether or not to perform the alarm action using the VMD function. Refer to page 33 for further information about the VMD area settings. Default: OFF [Command alarm] Select "ON" or "OFF" to determine whether or not to receive the command alarm. The command alarm is the function that notifies of Panasonic protocol alarm from the other cameras. When "ON" is selected, alarm actions will be performed between multiple cameras. Default: OFF 30