Panasonic WVNP1004 WVNP1004 User Guide - Page 35
Con the settings relating to the mail notification [Notification]
View all Panasonic WVNP1004 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Configure the settings relating to the mail notification [Notification] Click the [Notification] tab on the "Alarm setup" page. (☞ page 30) The settings relating to the alarm mail can be configured on this page. To notify of an alarm occurrence by e-mail, it is necessary to configure the settings of the mail server. (☞ page 39) [Mail body] Enter the mail body. Number of characters for the mail body: 0 - 200 char- acters [E-mail notification] Select "ON" or "OFF" to determine whether or not to notify of an alarm occurrence by e-mail at an alarm occurrence. Default: OFF Note: Notification mail will be sent with the following message. (The message to be sent differs depending on the status of the SD memory card). • "The SD memory card is full." (This message will be sent when the SD memory card becomes full.) • "The SD memory card cannot be recognized." (This message will be sent when failed to mount the SD memory card.) [Address] Enter the destination mail address. Up to 4 destination addresses can be registered. To notify by e-mail when an alarm occurred, check the "Alarm" checkbox respective to the desired address. To notify by e-mail when any of the following occurred, check the "Diag." checkbox respective to the desired address. • When notification of the remaining space of the SD memory card has been made (☞ page 22) • When the SD memory card became full • When mounting of the SD memory card failed To delete the registered address, click the [DEL] button respective to the desired address. Number of characters for the destination mail address: 3 - 128 characters [Mail subject] Enter the mail subject. Number of characters for the mail subject: 0 - 50 characters 35