Panasonic WVNP1004 WVNP1004 User Guide - Page 37

Configure the settings relating to the authentication [Authentication setup] The settings relating to the authentication such as users and PCs (IP addresses) restrictions for accessing the camera can be configured on the "Authentication setup" page. The "Authentication setup" page has 2 tabs of the [User] tab and the [Host] tab. Configure the settings relating to the user authentication [User] Click the [User] tab on the "Authentication setup" page. The settings relating to the user authentication can be configured on this page. Up to 16 users can be registered. [Access level] Select the access level of the host from the following. 1. Administrator: Allowed all available operations of the camera. 2. Camera control: Allowed to display images from the camera and to control the camera. The camera setting configuration is unavailable. 3. Live only: Only displaying live images is available. The camera setting configuration and camera control are unavailable. Default: 3. Live only [User authentication] Select ON or OFF to determine whether or not to authenticate the user. Default: OFF [User name] Enter a user name. Number of characters for the user name: 1 - 32 char- acters Default: (blank) [Password] [Retype password] Enter the password. Number of characters for the password: 4 - 32 char- acters Default: (blank) Note: By clicking [i] of "User name check", the registered user can be selected and the selected user's information can be checked. The registered user will be displayed with the access level. (Example: admin [1]) To delete the registered user, click the [DEL] button after selecting the user to be deleted. Important: If all users whose access level is "1. Administrator" is deleted, it will be impossible to configure the settings. Note: When the user name already in use is entered and the [REG] button is clicked, the respective user information will be overwritten. 37