Pentax 750Z Operation Manual - Page 34

Quick Start Quick Start Taking Still Pictures i button Mode dial 2 Shutter release button Zoom/w/x button The standard procedure for taking still pictures is described below. The flash fires automatically depending on the light conditions. 1 Press the power switch. 38 The camera turns on. 2 Set the mode dial to R. 3 Check the image on the LCD monitor. The focus frame in the middle of the LCD 09/25/2004 14:25 monitor indicates the zone of automatic Focus frame focusing. You can change the captured area by pressing the Zoom/w/x button to the right or left. x : enlarges the subject w : enlarges the area captured by the camera You can check the captured area by looking through the viewfinder. The image in the viewfinder always appears with a 4:3 aspect ratio regardless of the aspect ratio setting of the image. Use the LCD monitor when taking pictures with the aspect ratio set to 3:2. 4 Press the shutter release button halfway. The focus frame turns green if the subject is in focus. 32