Pentax 750Z Operation Manual - Page 87

• Make sure that the surface of the lens is clean as any dirt on the lens in r mode may cause the camera to focus on the dirt rather than on the subject. • If you take a picture while looking through the viewfinder when the focus mode is set to q or r, the range of the resulting picture will differ from what was seen in the viewfinder. Be sure to check the image on the LCD monitor. • The default setting is Autofocus mode. • Only the digital zoom can be used in r mode. Saving the Focus Mode 1p.107 Taking Pictures Manual Focus 1 Press the ) button in Capture mode to display z. 4 The central portion of the screen is magnified twice as large when focusing. 2 Press the Zoom/w/x button. The MF indicator appears on the LCD monitor, indicating the approximate distance to the subject. Using the indicator as a guide, adjust the focus with the Zoom/w/x button. x : for distant focus w : for closer focus 38 3 Press the 4 button. The focus position is set and the screen returns to the normal display. To set the focus position, you can also press 0.02 0.3 1 the shutter release button halfway or fully, or OK OK wait for at least five seconds. To readjust the focus, press the ) MF Indicator button once to return to Step 1 above. 4 Press the Zoom/w/x button to adjust the captured area. 100 When the focus position has been determined, the LCD monitor display returns to the normal picture range and the zoom bar appears in the position where the MF indicator was displayed for focusing. To enlarge the subject or capture a broader area, press the Zoom/w/x button to adjust the captured range. Zoom bar 85