Pentax 750Z Operation Manual - Page 65

2 1 8, 9 Taking Pictures 4, 5, 6 3, 7 E a b c R d D Automatically Changing the Shooting Conditions (Auto Bracket) Auto bracketing can be used to automatically vary settings such as the 4 exposure and white balance over a series of three shots when the shutter release button is pressed. This ensures that you are able to get the best shots. Auto Bracket Settings a Exposure Pictures are taken in the following sequence: normal, underexposed (dark), overexposed (bright). Choose the bracketing steps from 0.3, 0.7, 1.0, 1.3, 1.7, 2.0. (1p.59) Conditions change in the following sequence: normal, red tinge b White Balance (low color temperature), blue tinge (high color temperature). Choose the bracketing steps from 1, 2, 3, 4, 5. (1p.95) c Saturation Conditions change in the following sequence: Current Setting, - (low), + (high). (1p.105) d Sharpness Conditions change in the following sequence: Current Setting, - (soft), + (hard). (1p.104) e Contrast Conditions change in the following sequence: Current Setting, - (low), + (high). (1p.106) 1 Set the mode dial to a mode other than F, G, C, 7 or O. 2 Press the ( button to display a. The icon corresponding to the current setting appears, and then the setting appears for approx. five seconds. To take pictures with the current setting, go to Step 8 below. Current Setting Exposure 0.3EV OK Change Setting 63