Pfaff creative 1.5 Manual - Page 15

Preparations, Unpacking, Connect the Power Cord and Foot Control, Control

Get Pfaff creative 1.5 PDF manuals and user guides View all Pfaff creative 1.5 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

Preparations 2 Preparations Unpacking 1. Place the box on a steady, flat surface. Lift the machine out of the box, remove the outer packaging and lift off the machine hard cover. 2. Remove all outer packing material and the plastic bag. Note: Your PFAFF® creative™ 1.5 machine is adjusted to provide the best stitch result at normal room temperature. Extreme hot and cold temperatures can affect the sewn result. Note: Some fabrics have a lot of excess dye which can cause discoloration on other fabric but also on your sewing machine. This discoloring may be very difficult or impossible to remove. Fleece and denim fabric, especially red and blue, often contain a lot of excess dye. If you suspect that your fabric/ready-towear garment contains a lot of excess dye, always pre-wash it before sewing to avoid the discoloring. Connect the Power Cord and Foot Control Among the accessories you will find the power cord and the foot control. Note: Consult a qualified electrician if in doubt as how to connect the machine to the power source. Unplug the power cord when the machine is not in use. For this sewing machine, foot control model C-9000 manufactured by CHIEN HUNG TAIWAN Ltd must be used. 1. Connect the foot control cord to the front socket on the bottom right side of the machine (A). 2. Connect the power cord to the rear socket on the bottom right side of the machine (B). Plug the cord into the wall socket. 3. Press the ON/OFF switch to ON to turn on power and light (C). For the USA and Canada This sewing machine has a polarized plug (one blade wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the plug in any way. 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
Preparations
2 Preparations
Unpacking
1.
Place the box on a steady, flat surface. Lift the
machine out of the box, remove the outer packaging
and lift off the machine hard cover.
2.
Remove all outer packing material and the plastic
bag.
Note: Your PFAFF®
creative™ 1.5
machine is adjusted to
provide the best stitch result at normal room temperature.
Extreme hot and cold temperatures can affect the sewn result.
Note: Some fabrics have a lot of excess dye which can cause
discoloration on other fabric but also on your sewing machine.
This discoloring may be very difficult or impossible to remove.
Fleece and denim fabric, especially red and blue, often contain
a lot of excess dye. If you suspect that your fabric/ready-to-
wear garment contains a lot of excess dye, always pre-wash it
before sewing to avoid the discoloring.
Connect the Power Cord and Foot
Control
Among the accessories you will find the power cord and
the foot control.
Note: Consult a qualified electrician if in doubt as how to
connect the machine to the power source. Unplug the power
cord when the machine is not in use.
For this sewing machine, foot control model C-9000
manufactured by CHIEN HUNG TAIWAN Ltd must be
used.
1.
Connect the foot control cord to the front socket on
the bottom right side of the machine (A).
2.
Connect the power cord to the rear socket on the
bottom right side of the machine (B). Plug the cord
into the wall socket.
3.
Press the ON/OFF switch to ON to turn on power
and light (C).
For the USA and Canada
This sewing machine has a polarized plug (one blade
wider than the other). To reduce the risk of electric
shock, this plug is intended to fit in a polarized outlet
only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to install the proper outlet. Do
not modify the plug in any way.
15