Pfaff creative 1.5 Manual - Page 18
Threading the Machine, Needle Threader
View all Pfaff creative 1.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Preparations Threading the Machine Make sure that the presser foot is raised and the needle is in its highest position. 1. Place a felt pad and the thread spool on the spool pin and fit a spool cap of the right size and direction. Note: Hold thread with both hands to prevent it from slacking while threading. This ensures that the thread will be positioned properly in the threading path. 2. Pull the thread under the thread guide (A) from the right to the left. 3. Pull the thread from the right to left along the slot. 4. Pull the thread between the tension discs (B). 5. Thread down through the right-hand threading slot and then upwards through the left-hand threading slot. 6. Bring the thread from the right into the take-up lever (C) and down in the left-hand threading slot into the needle thread guide (D). 7. Thread the needle. Needle Threader The needle threader allows you to thread the needle automatically. The needle must be in its highest position to use the built-in needle threader. Press the needle up/ down button to make sure the needle is fully raised. We also recommend lowering the presser foot. 1. Use the handle (A) to pull the needle threader all the way down. Metal flanges encase the needle and a small hook will pass through the needle eye. 2. Place the thread from the back over the thread guide (B) and under the small hook (C). 3. Let the needle threader gently swing back. The hook pulls the thread through the needle eye and forms a loop behind the needle. Pull the thread loop out behind the needle. 4. Raise the presser foot and place the thread under it. Note: The needle threader is designed to be used for size 70120 needles. You cannot use the needle threader for size 60 needles or smaller, wing needles or twin needles. There are also some optional accessories that require manual threading of the needle. When threading the needle manually, make sure that the needle is threaded from front to back. 18