Pfaff creative 1.5 Manual - Page 61
The Machine Does Not Feed or Feeds Irregularly, The Embroidery Design has Puckered
View all Pfaff creative 1.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Bobbin Thread Breaks Did you insert the bobbin properly? Is the needle plate hole damaged? Is the bobbin area clean? Is the bobbin wound correctly? Check the bobbin thread. Change the needle plate. Clean lint from bobbin area and use only the bobbins approved for this model. Wind a new bobbin. The Seam Has Uneven Stitches Is the thread tension correct? Are you using too thick or slubbed thread? Is the bobbin thread evenly wound? Is a correct needle used? Check needle thread tension and the threading. Change the thread. Check bobbin winding. Insert a proper needle correctly as described in see page 22. The Machine Does Not Feed or Feeds Irregularly Did you thread the machine properly? Check how the machine is threaded. Has sewing lint collected between the feed dogs? Are the feed dogs raised? Remove the needle plate and clean the feed dogs with a brush. Raise the feed dogs. Unable To Sew a Buttonhole Machine beeps when using the One step buttonhole foot 5? Make sure the accessory tray is attached to the machine and the buttonhole lever is lowered all the way down. Lower the presser foot gently. The Embroidery Design is Distorted Is the fabric hooped properly? Is the inner embroidery hoop completely inserted in the outer embroidery hoop? The fabric must be tightly hooped. Hoop the fabric in such a way that the inner hoop always exactly matches the outer hoop. The Embroidery Design has Puckered Did you stabilize your fabric sufficiently? Ensure you use the proper stabilizer for your technique or fabric type. The Machine Will Not Embroider Is the embroidery unit attached? Is the wrong hoop attached? Make sure that the embroidery unit is properly attached into the socket. Slide on the correct hoop. Maintenance 61